Shiv Sons

Dr. Fixit Epoxy Bonding Agent is a two part solvent free bonding agent composed of liquid epoxy resin andhardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steelcomponents because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks,tiles, etc.Areas of ApplicationBonding agent for bonding of old to new concrete / mortar.To extend or repair structural concrete.Bonding agent of glazed brick, tiles, steel & structural members.

Areas of Application  Bonding agent for bonding of old to new concrete / mortar.  To extend or repair structural concrete.  Bonding agent of glazed brick, tiles, steel & structural members. Features & Benefits  Ease of application - Easily applicable by brush as a bonding agent for old to new concrete / mortar.  Adhesion - Excellent adhesion to almost all building materials.   Strength - Bond strength exceeds the tensile strength of concrete hence no failure of concrete due to high degree of movements.  Open time - Comfortable open time to complete the work easily.  Shrinkage - Very low shrinkage as compaired to polymer modified cementitious bonding agents  Water resistance - Excellent water resistance and sealing property prevents leakage.  Toxicity - Non toxic.  Moisture tolerant - It is moisture tolerant hence provides strong bond of new concrete to fresh concrete.  Durability - Very high durable bond.  Chemical Resistance - Resistant to chemical attack.

Used in sealing of expansion and construction joints as well as joints between different construction materials in high-rise buildings, basements, floorings, Sealing joints in between precast concrete panels, sealing joints in between tiles, bricks, and marble etc.

Dr. Fixit Fevimate XLis tile adhesive for large tiles and low porous tiles. It is used for fixing of tiles internally & externally over walls & floors with excellent bond on cementitious surfaces.Dr. Fixit Fevimate XLis composed of ordinary Portland cement properly selected & graded aggregates, polymer, rheology modifier & additives.Area of Application Suitable for large tiles and low porous tiles such as Ceramic tile, Porcelains, Granite, Marblesand Glass Mosaics Suitable area where contact to water such as bathroom, kitchen room, pond, swimming pool.Rate of Uses* Theoretical consumption without allowance for loss (20 kg.) with Clean Water 4.6 liter (23%)  3-7 Sqm /bag (depending on tile sizes weights, and substrates)Method of Application1. Surface preparation All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds, any other loose contaminating materials New concrete must be allowed to cure for at least 28 days and have a wood float finish Newly rendered/screenedsurfaces must be allowed to cure for at least 7 days and have wood float finish Street trowel finished concrete must be acid arched or mechanically abraded prior to tiling2. Mixing Mixing ratio of Dr. Fixit Fevimate XL1 bag (20kg.): Water 4.6 Liters Slowly add Dr. Fixit Fevimate XLto a bucket of water for mixing Use a trowel or mechanical mixer (speed at 150-500 RPM) for mixing until a thick creamy consistency is achieved Allow the mixture to stand for 5-10 minutes for chemical slaking and reducing air bubble Remix then use the adhesive and do not add additional water or powder after tile adhesive was set.3.Applications Spread mortar with flat side of trowel to key-in substrate; thenapply additional mortar to a depth sufficient to be notched with suitable trowel that will leave only enough mortar to give 100% contact with back of tile and a subsequent mortar bed of 3mm to 5mm With high lug tiles, “back buttering” may be required to ensure 100% coverage to back of tiles During the setting of tile, it is advisable to occasionally remove a tile to be sure mortar has not skinned over and sufficient transfer is being made. It is also required that tiles be embedded to obtain good transfer of mortar to tile and for proper alignment.

 Do not adjust tiles in mortar after they have been set past 10-15 minutes

ile Adhesive for large tiles and low porous tilesS-PI-001 Rev.EN0321August 2019Page 2/3Technical DataSheet Dr.Fixit Fevimate XL4. Cleaning Clean the tools & equipment with potable water immediately after use.Precautions & Limitation Always add powder to liquid and not liquid to powder Clean the tools & equipment with potable water immediately after use. While working in temperature more than 35 OC (95 oF) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 4 o C Dr.Fixit Fevimate XLshould not be used on painted, metal surfaces, ply & gypsum boards.

Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. It is used as an internal coating for the damproofing treatments of water tanks with anti-microbial anti fungal properties. It has excellent water resistance, adhesion to concrete surface, has good hardness and sets faster.