Shiv Sons

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

We supply high-performance liquid and powder concrete admixtures designed to enhance workability, setting time, water reduction, strength, and durability across various grades of concrete from M10 to M60.

Our admixtures are trusted for commercial, residential, infrastructure, and industrial projects, and conform to IS 9103 & ASTM C494 standards.

• M10, M20, M25 – Mass concrete, non-structural RCC

• M30, M35 – Columns, slabs, footings, load-bearing

• M40, M50 – Bridges, precast, high-performance RCC

• M60 – Ultra-high strength concrete (UHPC)

• Asian Paints SmartCare Admixtures

• Berger Construction Chemicals

• CICO Plast and Conplast Admixtures

• Dr. Fixit Pidipro Series (PIDICRETE, Pidimix)

• Fosroc Conplast / Auramix Range

• STP Ltd – Tech Admixtures / Plastizers

• Sika – Plastiment, ViscoCrete, SikaCim

Delhi NCR:
New Delhi, Noida, Greater Noida, Ghaziabad, Gurugram, Faridabad, Dwarka, Rohini

Uttar Pradesh:
Lucknow, Kanpur, Varanasi, Meerut, Agra, Bareilly, Aligarh, Prayagraj, Saharanpur

Haryana:
Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Ambala, Yamunanagar

Punjab:
Ludhiana, Amritsar, Jalandhar, Patiala, Bathinda, Mohali

Rajasthan:
Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

Bihar:
Patna, Gaya, Bhagalpur, Muzaffarpur, Darbhanga

Jharkhand:
Ranchi, Jamshedpur, Dhanbad, Hazaribagh

Uttarakhand & HP:
Dehradun, Haridwar, Roorkee, Shimla, Solan, Kangra

Jammu & Kashmir (UT):
Jammu, Srinagar, Udhampur, Kathua

  #AdmixtureDelhi #AdmixtureNoida #AdmixtureGhaziabad #AdmixtureGurugram #AdmixtureFaridabad  

#ConcreteAdditiveDelhi #ConcreteAdmixtureNCR #ConstructionChemicalsNoida  

#AdmixtureLucknow #AdmixtureJaipur #AdmixturePatna #AdmixtureChandigarh  

#AdmixtureNorthIndia #ConcreteAdmixtureSupplierDelhi #AdmixtureDealerIndia

• High‑range water reduction: Reduces water demand by up to ~25 % without loss of workability, resulting in denser and stronger concrete.

• Improved workability: Concrete becomes easier to place and compact without adding extra water.

• Enhanced cohesion: Better dispersion of particles reduces segregation and bleeding, aiding pumpability and finish quality.

• Increased strength: When water reduction is taken advantage of, early and ultimate strength gains are achieved.

• Chloride‑free: Safe for reinforced and prestressed concrete — does not promote corrosion.

• Improved durability: Lower permeability enhances concrete life and resistance to environmental attack.
  
  

  🧱 Typical Uses

  • High‑performance concrete for structural elements

  • Pumpable concrete for deep foundations, high‑rise buildings

  • Precast and prestressed units requiring early strength

  • Concrete requiring high workability with low water/cement ratio

  • Concrete needing minimized segregation and reduced permeability  

  📊 Performance Properties

  • Form: Brown liquid, instantly dispersible in water

  • Water reduction: Up to ~25 % depending on mix design

  • Specific gravity: ~1.13 ± 0.02

  • Chloride content: Nil (meets standards for reinforced concrete)

  • Air entrainment: ~≤ 1 % additional air at normal dosage

  • Compatibility: Works with all ordinary cements (except high‑alumina) and with supplementary cementitious materials (e.g., microsilica)
    
    

    📦 Standards & Compliance

    • Complies with IS:9103‑1999 and BS:5075 Part 3

    • Conforms to ASTM C494M – Type G (high‑range water reducer)

    • May also perform as ASTM C494 Type F depending on dosage used

    
    

     

  
  

   

• Typical dosage: ~0.5 – 2.0 L per 100 kg of cementitious material (optimize via trial mixes)

• Add the admixture with part of the gauging water during mixing for best dispersion.
  
  

  📦 Packaging

  • Supplied in 5 L, 20 L, and 200 L drums

  • Shelf life typically ~12 months when stored in sealed containers in cool, dry conditions
    
    Summary:
    Fosroc Conplast SP430 G8 is a brown liquid, sulph­onated napthalene‑based superplasticiser that delivers high water reduction, improved workability, enhanced strength, and better durability for concrete, while being chloride‑free and safe for reinforced concrete use. 

   

• Advanced technology.
• Corrosion resistance.
• High strength.
• Cohesive mix.
• Durability.

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

• Advanced low‑viscosity, high‑range superplasticiser based on modern polycarboxylic technology.

• Designed for retarding effects — helps delay setting and maintains workability for longer periods.

• Suitable for high‑performance concrete requiring enhanced flow and durability.

• Chloride‑free and safe for reinforced concrete. 

• Typically appears as a light yellow liquid with a neutral/basic pH.

• Improved workability and pumpability — easier placing and compaction.

• Retards hydration heat and setting, useful for mass pours or hot climates.

• Reduces shrinkage and creep, and enhances long‑term durability

• Better resistance to carbonation and aggressive environments.

• Enhances adhesion to reinforcement and increases elastic modulus
  
  
  
  

  🧱 Typical Uses

  • Mass raft foundations

  • Pumped concrete

  • Concretes requiring long workability retention

  • High‑performance concrete mixes with tight placing windows
    
    

    📊 Compliance & Standards

     

    • Complies with IS 9103‑1999 and can meet ASTM C494 (Types F & G) depending on dosage used.
      
      

      📦 Packaging

       

      • Usually supplied in 200 kg or 250 kg drums or bulk tanker delivery.

  
  

   

• Type: Chloride‑free accelerating and water‑reducing concrete admixture

• Form: Light straw‑coloured liquid

• Standard Compliance: Meets ASTM C494 Type C and BS 5075 requirements

• Chloride Content: Nil — safe for reinforced and prestressed concrete
  
  
  

  ⭐ Key Features & Benefits

   

  • Accelerates setting time and early strength development of cement concrete and mortar

  • Particularly effective at low temperatures — helps offset delay in setting caused by cold weather

  • Provides plasticising action — can improve workability and/or strength

  • Improves frost resistance in early age concrete

  • Chloride‑free, making it safe for use with reinforcement

  • Also suitable for bricklaying mortar mixes
    
    
    

    🧱 Typical Uses

    • Concrete placed in cold weather to speed up setting and early strength

    • Precast concrete elements for faster turnaround of forms

    • Concrete repairs requiring quicker strength gain

    • Mortar for brickwork to improve performance
      
      
      
      
      

      📊 Performance & Dosage

       

      • Typical dosage: ~2.0 to 3.0 litres per 100 kg of cement (optimum dose determined by trial mixes)

      • Accelerated setting and strength effects are most noticeable in the first 24 hours after mixing

      • Also offers a degree of water reduction or improved workability
        
        
        

        🧠 How It Works

        Conplast NC accelerates the early stages of cement hydration, causing the concrete to stiffen earlier and begin strength gain sooner. This is particularly useful when concrete work must progress quickly or in conditions where normal setting would be delayed.  

• High water reduction: Reduces water content while maintaining workability, resulting in stronger and more durable concrete.

• Excellent workability retention: Slump and flow are maintained for extended periods, making it ideal for large pours or hot climates.

• Improved pumpability: Low viscosity improves ease of pumping and placement in congested reinforcement areas.

• Enhanced rheology: Produces cohesive, non-segregating mixes with smooth finish.

• Chloride-free: Safe for reinforced and prestressed concrete.

• Durability: Contributes to reduced shrinkage, creep, and permeability.

• Self-compacting concrete (SCC) for complex or congested structures.

• Pumped concrete for high-rise buildings, bridges, and deep foundations.

• High-performance concrete (HPC) for structural elements requiring durability.

• Large pours requiring extended workability and cohesion.

• IS 9103‑1999 (2013) – Indian standard for concrete admixtures.

• ASTM C494 Types F & G – High-range water-reducing admixture and workability-retaining admixture.

• Form: Light yellow liquid

• pH: ≥ 6.0

• Chloride content: Nil 

We supply high-performance liquid and powder concrete admixtures designed to enhance workability, setting time, water reduction, strength, and durability across various grades of concrete from M10 to M60.

Our admixtures are trusted for commercial, residential, infrastructure, and industrial projects, and conform to IS 9103 & ASTM C494 standards.

• M10, M20, M25 – Mass concrete, non-structural RCC

• M30, M35 – Columns, slabs, footings, load-bearing

• M40, M50 – Bridges, precast, high-performance RCC

• M60 – Ultra-high strength concrete (UHPC)

• Asian Paints SmartCare Admixtures

• Berger Construction Chemicals

• CICO Plast and Conplast Admixtures

• Dr. Fixit Pidipro Series (PIDICRETE, Pidimix)

• Fosroc Conplast / Auramix Range

• STP Ltd – Tech Admixtures / Plastizers

• Sika – Plastiment, ViscoCrete, SikaCim

Delhi NCR:
New Delhi, Noida, Greater Noida, Ghaziabad, Gurugram, Faridabad, Dwarka, Rohini

Uttar Pradesh:
Lucknow, Kanpur, Varanasi, Meerut, Agra, Bareilly, Aligarh, Prayagraj, Saharanpur

Haryana:
Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Ambala, Yamunanagar

Punjab:
Ludhiana, Amritsar, Jalandhar, Patiala, Bathinda, Mohali

Rajasthan:
Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

Bihar:
Patna, Gaya, Bhagalpur, Muzaffarpur, Darbhanga

Jharkhand:
Ranchi, Jamshedpur, Dhanbad, Hazaribagh

Uttarakhand & HP:
Dehradun, Haridwar, Roorkee, Shimla, Solan, Kangra

Jammu & Kashmir (UT):
Jammu, Srinagar, Udhampur, Kathua

  #AdmixtureDelhi #AdmixtureNoida #AdmixtureGhaziabad #AdmixtureGurugram #AdmixtureFaridabad  

#ConcreteAdditiveDelhi #ConcreteAdmixtureNCR #ConstructionChemicalsNoida  

#AdmixtureLucknow #AdmixtureJaipur #AdmixturePatna #AdmixtureChandigarh  

#AdmixtureNorthIndia #ConcreteAdmixtureSupplierDelhi #AdmixtureDealerIndia

• Type: Corrosion inhibiting concrete admixture

• Chemical Base: Calcium nitrite solution (typically min. ~30% calcium nitrite)

• Appearance: Pale straw coloured liquid that disperses readily in mixing water

• Chloride Content: Very low / nil to prevent reinforcement corrosion 

• Corrosion protection: The calcium nitrite acts as a corrosion inhibitor for steel reinforcement in concrete — particularly useful in structures exposed to chlorides (e.g., marine, de‑icing salts).

• Can be used with other admixtures: Compatible with many other Fosroc concrete admixtures (just add separately; don’t premix them together).

• Improved durability: Helps extend service life of reinforced concrete.

• Neutral effect on workability: Does not significantly affect normal concrete flow or strength when used at appropriate dosage.
  
  

  🧱 Typical Uses

  • Reinforced concrete in marine or coastal structures

  • Concrete exposed to de‑icing salts

  • Parking decks, bridges, highways, industrial floors

  • Concrete where high durability and corrosion resistance are required

  • In mixes also containing other performance admixtures (e.g., plasticisers or superplasticisers)

  
  

   

Calcium nitrite migrates to the steel surface and forms a protective layer that inhibits corrosion reactions between steel and aggressive ions like chlorides. This helps maintain the integrity of reinforcement and increases concrete longevity

• Typical dosage range: ~7.5 to 22.5 litres per m³ of concrete — exact amount determined by trial mix and project requirements.

• Add with the mixing water to ensure uniform distribution.

• Include the water from the admixture when calculating the total water/cement ratio because Conplast CN is added in significant volume.

• Storage: Keep in original sealed container, cool and dry, with a typical 12‑month shelf life.

• Follow good curing practices to maximise concrete performance and ensure corrosion protection.

Fosroc Conplast CN is a corrosion‑inhibiting calcium nitrite‑based concrete admixture that enhances the durability of reinforced concrete in corrosion‑prone environments, while being compatible with other admixtures and having minimal impact on workability and strength.

If you want, I can also provide chemical base, dosage guidelines, compatibility, or comparison with other corrosion inhibitors.

• High‑range water reduction: Allows for substantial water‑cement ratio reduction, increasing concrete strength and reducing permeability.

• Improves workability and cohesion: Produces concrete that’s easier to place and compact, with reduced segregation and bleeding. 

• Enhances pumpability: Smoother flow through pumps and congested reinforcement zones.
  
  

  ⭐ Key Features & Benefits

  • Chloride‑free: Safe for reinforced and prestressed concrete without increasing corrosion risk.

  • Higher strength gain: Encourages both early and ultimate strength improvements. 

  • Better durability: Reduces permeability, improving long‑term performance. 

  • Reduced segregation & bleeding: Concrete remains cohesive even with low water content.

  • Compatibility: Works with ordinary Portland cement and mixes containing supplementary cementitious materials like PFA, GGBFS, and microsilica.
    
    

    📏 Typical Uses

    • High‑strength and high‑performance concrete

    • Pumpable concrete for structural pours

    • Precast and prestressed concrete components

    • Large construction pours where flow and strength are critical
      
      

      📊 Standards Compliance

       

      • IS 9103:1999 (Indian standard for concrete admixtures)

      • BS 5075 Part 3

      • ASTM C494 Type F & G depending on dosage used
        
        

        Packaging & Storage

        • Supplied in 200 L drums, 250 kg barrels or bulk

        • Store in dry and cool conditions in unopened containers

        • Shelf life: ~12 months when stored properly

  
  
  

   

👉 ~0.6 – 1.5 L per 100 kg of cementitious material (optimize via trial mixes).

The exact dosage depends on the desired workability, strength, and mix design. Always conduct trial batches to find the optimum amount.

📌 Physical Properties

1. Appearance: Brown liquid 
2. Chloride content: Nil (meets BS 5075)
3. Air entrainment: Typically < 2% additional air at normal dosage
4. Specific gravity: ~1.238–1.240

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

Fosroc Conplast SP500 is a high-performance water-reducing and superplasticising concrete admixture supplied as a brown liquid that disperses instantly in water. It is formulated using sulphonated naphthalene polymers to significantly improve concrete quality and performance. 

It complies with IS 9103:1999, BS 5075 Part 3 and conforms to ASTM C494 Type G standards. 

• Water reduction: Reduces the amount of water required in a concrete mix (up to around 25%) while maintaining workability. 

• Superplasticiser effect: Enhances flowability and concrete fluidity — good for pumpable and self-placing concrete. 

• Improved workability: Makes concrete easier to place and compact with little or no vibration. 

• Higher strength: Lower water content leads to higher early and ultimate compressive strength. 

• Better durability: Produces a denser concrete with reduced porosity and permeability, improving long-term durability. 

• Higher cohesion: Reduces segregation and bleeding, helping with concrete stability and surface finish. 

• Chloride-free: Safe for prestressed concrete and marine environments. 
  
  
  

  📍 Typical Uses

  Conplast SP500 is typically used where high workability and high-strength concrete is needed, such as:

  • Pumpable concrete mixes for large pours

  • High-grade and high-strength concrete for precast elements

  • Concrete requiring reduced vibration placing

  • Infrastructure and industrial projects with demanding performance requirements 

  
  

   

• Form: Brown liquid, instantly dispersible in water 

• Based on: Sulphonated naphthalene polymers 

• Water reduction: Up to ~25% without losing workability 

• Compatibility: Works with most cements (except high-alumina cement) and other admixtures when added separately 

• Chloride content: Nil as per standard requirements 
  
  

  📋 How to Use 

  • Add Conplast SP500 to the concrete with the gauging water during mixing.

  • For best results, add it after pre-wetting the mix with about 80 % of the total water required.
    
    

    ✅ Benefits

    ✔ Better fluidity and flow without extra water
    ✔ Increased early strength and durability
    ✔ Easier placing and finishing
    ✔ Reduces segregation and bleeding

    ✔ Chloride-free for safety in reinforced structures
    
     In short: Fosroc Conplast SP500 is a superplasticiser admixture that enhances concrete performance by reducing water demand, increasing workability and strength, and improving overall durability — ideal for high-quality, pumpable, and high-strength concrete mixes.

• Conplast SP430 SRV is a superplasticising, slump-retaining concrete admixture. It is supplied as a dark brown liquid based on a blend of specially selected organic polymers.

• In technical usage classification, it meets the standard for a Type G high-range water-reducing / slump-retaining admixture under ASTM C 494 (or equivalent national/international standards)     
  
  

  🔧 What it does — Functions & Benefits

  Using Conplast SP430 SRV in a concrete mix brings several key advantages:
  
  

• Improved Workability: Greatly increases the fluidity/workability of fresh concrete — making it easier to place, pump or pour, especially in congested formwork or heavily reinforced structures. 

• Workability Retention / Slump Retention: Helps maintain slump (i.e. flowability) over a longer period. That makes it useful when there are delays in transportation, long haul to site, or delays between mixing and placing, or when ambient temperatures are high (which normally cause rapid slump loss).

• Reduced Water Demand (Water Reduction): Because of improved workability, water content can be reduced (versus a plain mix) while maintaining desired workability — which helps create denser, less permeable concrete. This improves durability / waterproofness.

• Better Quality / Durability: Concrete with lower permeability and improved compaction — less segregation and bleeding — tends to have better long-term performance. Also helps resist water penetration — good for structures exposed to moisture or aggressive environments (e.g. marine, underground)

• Self-Compacting / Ease of Compaction: The mix becomes highly fluid and may need little or no mechanical compaction (vibration), making placement easier, faster, and often more uniform.

• Improved Pumpability: For pumped concrete, SP430 SRV helps reduce line friction, avoid dry-packing, reduce slump loss — all aiding smooth pumping and delivery.

• Safe for Reinforced & Prestressed Concrete: It is chloride-free, making it suitable for use in reinforced or prestressed concrete (since chlorides can cause steel corrosion). It’s also compatible with sulphate-resisting cement or marine aggregates. 

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

We supply high-performance liquid and powder concrete admixtures designed to enhance workability, setting time, water reduction, strength, and durability across various grades of concrete from M10 to M60.

Our admixtures are trusted for commercial, residential, infrastructure, and industrial projects, and conform to IS 9103 & ASTM C494 standards.

• M10, M20, M25 – Mass concrete, non-structural RCC

• M30, M35 – Columns, slabs, footings, load-bearing

• M40, M50 – Bridges, precast, high-performance RCC

• M60 – Ultra-high strength concrete (UHPC)

• Asian Paints SmartCare Admixtures

• Berger Construction Chemicals

• CICO Plast and Conplast Admixtures

• Dr. Fixit Pidipro Series (PIDICRETE, Pidimix)

• Fosroc Conplast / Auramix Range

• STP Ltd – Tech Admixtures / Plastizers

• Sika – Plastiment, ViscoCrete, SikaCim

Delhi NCR:
New Delhi, Noida, Greater Noida, Ghaziabad, Gurugram, Faridabad, Dwarka, Rohini

Uttar Pradesh:
Lucknow, Kanpur, Varanasi, Meerut, Agra, Bareilly, Aligarh, Prayagraj, Saharanpur

Haryana:
Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Ambala, Yamunanagar

Punjab:
Ludhiana, Amritsar, Jalandhar, Patiala, Bathinda, Mohali

Rajasthan:
Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

Bihar:
Patna, Gaya, Bhagalpur, Muzaffarpur, Darbhanga

Jharkhand:
Ranchi, Jamshedpur, Dhanbad, Hazaribagh

Uttarakhand & HP:
Dehradun, Haridwar, Roorkee, Shimla, Solan, Kangra

Jammu & Kashmir (UT):
Jammu, Srinagar, Udhampur, Kathua

  #AdmixtureDelhi #AdmixtureNoida #AdmixtureGhaziabad #AdmixtureGurugram #AdmixtureFaridabad  

#ConcreteAdditiveDelhi #ConcreteAdmixtureNCR #ConstructionChemicalsNoida  

#AdmixtureLucknow #AdmixtureJaipur #AdmixturePatna #AdmixtureChandigarh  

#AdmixtureNorthIndia #ConcreteAdmixtureSupplierDelhi #AdmixtureDealerIndia

Fosroc Reebol is a chemically active release agent based on refined oils and additives. It reacts with the alkali in fresh concrete to form a thin, non-staining barrier that allows formwork to be removed cleanly without damaging the concrete surface.

• Ensures easy and clean release of formwork

• Produces smooth, fair-faced concrete finish

• Reduces blowholes and surface defects

• Non-staining – suitable for architectural concrete

• Extends formwork life

• Ready to use – no dilution required

• Economical with low application rate
  
  

  🧱 Suitable For

  • Steel formwork

  • Timber / plywood shutters

  • Plastic and fiberglass moulds

  • Precast concrete moulds

  • In-situ concrete construction
    
    

     

    • Apply by brush, roller, or spray

    • Formwork should be clean, dry, and free from dust

    • Apply a thin, even coat

    • Avoid over-application to prevent surface defect
      
      

      🛠️ Application Method

       

      • Apply by brush, roller, or spray

      • Formwork should be clean, dry, and free from dust

      • Apply a thin, even coat

      • Avoid over-application to prevent surface defects
        
        
        

        📌 Typical Uses

         

        • Buildings & infrastructure projects

        • Precast yards

        • Columns, beams, slabs, walls, and foundations

        • Architectural and exposed concrete works