Shiv Sons

• High durability and long service life
• High movement accommodation
• Cold applied — no heating equipment required
• Fuel, oil and hydraulic fluid resistance
• Jet blast resistant
• Retains its movement accommodation of 25% on butt joints throughout the extremes of temperature, it does not harden in cold weather nor become excessively soft, or pick up in hot conditions
• Complies to BS EN 14188-2:2004
• Complies to BS5212 Part1:1990 
• Fosroc Colpor 200PF is non-flammable

We supply high-performance floor hardeners — both metallic and non-metallic — ideal for increasing surface durability, abrasion resistance, and impact strength of concrete floors.

Our floor hardeners are trusted in industrial, warehouse, commercial, and heavy-traffic flooring applications, and conform to IS 1237 & ASTM C779 standards.

Metallic & Non-Metallic Floor Hardeners – Industrial Grade

🏷️ Top Brands We Offer:

STP Ltd – ShaliFloor® M DH (Metallic), ShaliFloor® NM (Non-Metallic)

CICO Technologies – Surface Hardener, CICOFLOOR TOP RTU (M/NM)

Fosroc Chemicals – Nitoflor Hardtop Standard

Sika India – Sikachapdur IN

UltraTech Cement Ltd – SmartTop (Metallic/Non-Metallic)

Key Features:

Pre-mixed, factory-ready dry shake

Increases compressive strength and abrasion resistance

Reduces surface dusting, cracking, and erosion

Available in metallic (iron/quartz) and non-metallic (mineral-based)

Compatible with manual and power trowel finishing

🏗️ Ideal Applications:

Industrial factories & warehouses

Heavy-load machine foundations

Basement parking & ramps

Precast yards and foundries

Airport runways & logistics hubs

Loading docks, godowns, retail flooring

📍 We Supply Across North India (District-wise):

✅ Delhi NCR: New Delhi, Noida, Greater Noida, Gurugram, Faridabad, Ghaziabad, Shahdara, Dwarka, Rohini

✅ UP: Lucknow, Kanpur, Varanasi, Agra, Meerut, Bareilly, Aligarh, Saharanpur

✅ Haryana: Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Yamunanagar, Ambala

✅ Punjab: Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan: Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar: Patna, Gaya, Muzaffarpur, Bhagalpur

✅ Jharkhand: Ranchi, Jamshedpur, Dhanbad

✅ Uttarakhand & HP: Dehradun, Haridwar, Roorkee, Shimla, Solan

✅ J&K (UT): Jammu, Srinagar, Kathua, Udhampur

#FloorHardenerDelhi #MetallicFloorHardenerNoida #NonMetallicHardenerGhaziabad

#ShaliFloorMDH #ShaliFloorNM #CICOFloorTopRTU #SikachapdurIN #SmartTopUltraTech

#IndustrialFloorHardener #HeavyDutyFloorCoating #NitoflorHardtopStandard

#WarehouseFloorTreatment #ConcreteSurfaceHardener #DryShakeFloorHardener

#FloorHardenerNorthIndia #AbrasionResistantFloorDelhi #DustproofFlooringSolution

#STPFloorHardener #CICOTopRTU #SikaFloorHardenerIndia #UltraTechSmartTop 

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

We supply high-performance floor hardeners — both metallic and non-metallic — ideal for increasing surface durability, abrasion resistance, and impact strength of concrete floors.

Our floor hardeners are trusted in industrial, warehouse, commercial, and heavy-traffic flooring applications, and conform to IS 1237 & ASTM C779 standards.

Metallic & Non-Metallic Floor Hardeners – Industrial Grade

🏷️ Top Brands We Offer:

STP Ltd – ShaliFloor® M DH (Metallic), ShaliFloor® NM (Non-Metallic)

CICO Technologies – Surface Hardener, CICOFLOOR TOP RTU (M/NM)

Fosroc Chemicals – Nitoflor Hardtop Standard

Sika India – Sikachapdur IN

UltraTech Cement Ltd – SmartTop (Metallic/Non-Metallic)

Key Features:

Pre-mixed, factory-ready dry shake

Increases compressive strength and abrasion resistance

Reduces surface dusting, cracking, and erosion

Available in metallic (iron/quartz) and non-metallic (mineral-based)

Compatible with manual and power trowel finishing

🏗️ Ideal Applications:

Industrial factories & warehouses

Heavy-load machine foundations

Basement parking & ramps

Precast yards and foundries

Airport runways & logistics hubs

Loading docks, godowns, retail flooring

📍 We Supply Across North India (District-wise):

✅ Delhi NCR: New Delhi, Noida, Greater Noida, Gurugram, Faridabad, Ghaziabad, Shahdara, Dwarka, Rohini

✅ UP: Lucknow, Kanpur, Varanasi, Agra, Meerut, Bareilly, Aligarh, Saharanpur

✅ Haryana: Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Yamunanagar, Ambala

✅ Punjab: Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan: Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar: Patna, Gaya, Muzaffarpur, Bhagalpur

✅ Jharkhand: Ranchi, Jamshedpur, Dhanbad

✅ Uttarakhand & HP: Dehradun, Haridwar, Roorkee, Shimla, Solan

✅ J&K (UT): Jammu, Srinagar, Kathua, Udhampur

#FloorHardenerDelhi #MetallicFloorHardenerNoida #NonMetallicHardenerGhaziabad

#ShaliFloorMDH #ShaliFloorNM #CICOFloorTopRTU #SikachapdurIN #SmartTopUltraTech

#IndustrialFloorHardener #HeavyDutyFloorCoating #NitoflorHardtopStandard

#WarehouseFloorTreatment #ConcreteSurfaceHardener #DryShakeFloorHardener

#FloorHardenerNorthIndia #AbrasionResistantFloorDelhi #DustproofFlooringSolution

#STPFloorHardener #CICOTopRTU #SikaFloorHardenerIndia #UltraTechSmartTop 

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

Product Description:
We supply premium-grade microconcrete – a ready-to-use, flowable, non-shrink repair mortar designed for concrete jacketing, structural rehabilitation, beam-column strengthening, and more.

Formulated for high early strength and superior bonding, microconcrete is ideal where manual placement is impossible and vibration is not feasible.

✅ Available Brands:

• STP Ltd

• Asian Paints SmartCare

• Berger Construction Chemicals

• CICO Technologies

• Dr. Fixit (Pidilite)

• Fosroc Chemicals

• UltraTech Building Products

📦 Packaging:
Standard 25 kg / 30 kg bags or custom palletized orders (bulk supply available)

• Non-shrink, free-flowing, high strength repair mortar

• Excellent bonding to concrete substrates

• No need for compaction/vibration

• Chloride-free – safe for embedded steel reinforcement

• Compatible with rebars and concrete interfaces

• Pumpable & pourable for high-accessibility zones

• Complies with ASTM C1107 & IS standards

• RCC beam/column strengthening

• Jacketing and retrofitting of structural elements

• Bridge decks, industrial floors, underplate grouting

• Honeycomb zone repair

• Overhead and vertical structural patching

• Machine foundation repair

✅ Delhi NCR:
New Delhi, Gurugram, Faridabad, Ghaziabad, Noida, Greater Noida, Rohini, Dwarka

✅ Haryana:
Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Ambala, Yamunanagar

✅ Uttar Pradesh:
Lucknow, Agra, Kanpur, Varanasi, Meerut, Bareilly, Mathura, Aligarh, Saharanpur

✅ Punjab:
Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan:
Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar:
Patna, Muzaffarpur, Gaya, Bhagalpur, Darbhanga

✅ Uttarakhand & HP:
Dehradun, Roorkee, Haridwar, Shimla, Solan, Kangra

✅ Jammu & Kashmir (UT):
Jammu, Srinagar, Udhampur, Kathua, Anantnag

#MicroconcreteDelhi  

#MicroconcreteNoida  

#MicroconcreteGhaziabad  

#MicroconcreteGurugram  

#MicroconcreteFaridabad  

#FosrocMicroconcrete  

#DrFixitMicroconcrete  

#CICOMicroconcrete  

#UltratechRepairMortar  

#AsianPaintsMicroconcrete  

#StructuralRepairDelhi  

#JacketingMaterialIndia  

#NonShrinkGroutDelhi  

#ReadyMixMicroconcrete  

#MicroconcreteNorthIndia  

Product description:

Description:

Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas producing expansion medium.

The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.

Sufficient restrained expansion is developed to ensure a high degree of inter facial contact.

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
• Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.
• Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Composition allows high early strength development in grouts, without the use of chlorides.

Advantages:

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
• Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.
• Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
• Composition allows high early strength development in grouts, without the use of chlorides.

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads.
Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc.,
It can also be used for anchoring a wide range of fixings.
These include masts, anchor bolts and fence posts.

Additional Information:

Item Code: t

Production Capacity: avilable

Delivery Time: 1-5 days

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

Penetrates concrete, seals capillary tracts and hairline cracks.

Contains no chlorides.

Easy to apply, cost effective in use.

Can be applied to new or old concrete in both interior and exterior locations.

Suitable above or below ground.

Surface damage will not affect the system.

We supply high-performance floor hardeners — both metallic and non-metallic — ideal for increasing surface durability, abrasion resistance, and impact strength of concrete floors.

Our floor hardeners are trusted in industrial, warehouse, commercial, and heavy-traffic flooring applications, and conform to IS 1237 & ASTM C779 standards.

Metallic & Non-Metallic Floor Hardeners – Industrial Grade

🏷️ Top Brands We Offer:

STP Ltd – ShaliFloor® M DH (Metallic), ShaliFloor® NM (Non-Metallic)

CICO Technologies – Surface Hardener, CICOFLOOR TOP RTU (M/NM)

Fosroc Chemicals – Nitoflor Hardtop Standard

Sika India – Sikachapdur IN

UltraTech Cement Ltd – SmartTop (Metallic/Non-Metallic)

Key Features:

Pre-mixed, factory-ready dry shake

Increases compressive strength and abrasion resistance

Reduces surface dusting, cracking, and erosion

Available in metallic (iron/quartz) and non-metallic (mineral-based)

Compatible with manual and power trowel finishing

🏗️ Ideal Applications:

Industrial factories & warehouses

Heavy-load machine foundations

Basement parking & ramps

Precast yards and foundries

Airport runways & logistics hubs

Loading docks, godowns, retail flooring

📍 We Supply Across North India (District-wise):

✅ Delhi NCR: New Delhi, Noida, Greater Noida, Gurugram, Faridabad, Ghaziabad, Shahdara, Dwarka, Rohini

✅ UP: Lucknow, Kanpur, Varanasi, Agra, Meerut, Bareilly, Aligarh, Saharanpur

✅ Haryana: Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Yamunanagar, Ambala

✅ Punjab: Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan: Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar: Patna, Gaya, Muzaffarpur, Bhagalpur

✅ Jharkhand: Ranchi, Jamshedpur, Dhanbad

✅ Uttarakhand & HP: Dehradun, Haridwar, Roorkee, Shimla, Solan

✅ J&K (UT): Jammu, Srinagar, Kathua, Udhampur

#FloorHardenerDelhi #MetallicFloorHardenerNoida #NonMetallicHardenerGhaziabad

#ShaliFloorMDH #ShaliFloorNM #CICOFloorTopRTU #SikachapdurIN #SmartTopUltraTech

#IndustrialFloorHardener #HeavyDutyFloorCoating #NitoflorHardtopStandard

#WarehouseFloorTreatment #ConcreteSurfaceHardener #DryShakeFloorHardener

#FloorHardenerNorthIndia #AbrasionResistantFloorDelhi #DustproofFlooringSolution

#STPFloorHardener #CICOTopRTU #SikaFloorHardenerIndia #UltraTechSmartTop 

Product Description:
We supply premium-grade microconcrete – a ready-to-use, flowable, non-shrink repair mortar designed for concrete jacketing, structural rehabilitation, beam-column strengthening, and more.

Formulated for high early strength and superior bonding, microconcrete is ideal where manual placement is impossible and vibration is not feasible.

✅ Available Brands:

• STP Ltd

• Asian Paints SmartCare

• Berger Construction Chemicals

• CICO Technologies

• Dr. Fixit (Pidilite)

• Fosroc Chemicals

• UltraTech Building Products

📦 Packaging:
Standard 25 kg / 30 kg bags or custom palletized orders (bulk supply available)

• Non-shrink, free-flowing, high strength repair mortar

• Excellent bonding to concrete substrates

• No need for compaction/vibration

• Chloride-free – safe for embedded steel reinforcement

• Compatible with rebars and concrete interfaces

• Pumpable & pourable for high-accessibility zones

• Complies with ASTM C1107 & IS standards

• RCC beam/column strengthening

• Jacketing and retrofitting of structural elements

• Bridge decks, industrial floors, underplate grouting

• Honeycomb zone repair

• Overhead and vertical structural patching

• Machine foundation repair

✅ Delhi NCR:
New Delhi, Gurugram, Faridabad, Ghaziabad, Noida, Greater Noida, Rohini, Dwarka

✅ Haryana:
Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Ambala, Yamunanagar

✅ Uttar Pradesh:
Lucknow, Agra, Kanpur, Varanasi, Meerut, Bareilly, Mathura, Aligarh, Saharanpur

✅ Punjab:
Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan:
Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar:
Patna, Muzaffarpur, Gaya, Bhagalpur, Darbhanga

✅ Uttarakhand & HP:
Dehradun, Roorkee, Haridwar, Shimla, Solan, Kangra

✅ Jammu & Kashmir (UT):
Jammu, Srinagar, Udhampur, Kathua, Anantnag

#MicroconcreteDelhi  

#MicroconcreteNoida  

#MicroconcreteGhaziabad  

#MicroconcreteGurugram  

#MicroconcreteFaridabad  

#FosrocMicroconcrete  

#DrFixitMicroconcrete  

#CICOMicroconcrete  

#UltratechRepairMortar  

#AsianPaintsMicroconcrete  

#StructuralRepairDelhi  

#JacketingMaterialIndia  

#NonShrinkGroutDelhi  

#ReadyMixMicroconcrete  

#MicroconcreteNorthIndia  

Uses :

• Renderoc RG is used for repairs to damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible.
• It is suitable for various structural strengthening measures such as encasement build-ups, jacketing, piletop encapsulation resin system, etc.

• Emergency water-stopping capability.
• Single component - only requires addition of clean water.
• Excellent bond to the substrate.
• Low exotherm minimizes thermal cracking.
• Pre-bagged formulation to overcome variations in site batching Contains no chloride admixtures.

Conbextra GP4 is a ready-to-use dry powder grout. When mixed with the correct amount of clean water, it becomes a fluid, non-shrink grout capable of flowing into gaps, voids, and under heavy machinery baseplates without segregation or bleeding. Its formulation includes Portland cement, graded mineral fillers, and chemical additives that help it expand slightly in the plastic state and compensate for shrinkage as it hardens.

✔ High Strength & Durability: Develops high early and ultimate compressive strength, making it suitable for heavy loads.
✔ Non-Shrink & Dual Shrinkage Compensation: Ensures full contact with the substrate with minimal cracking or settlement.
✔ Free-Flowing Precision Grout: Excellent flowability for complete void filling and precision grouting.
✔ Chloride-Free & Non-Corrosive: Safe for use around reinforcement and structural steel.
✔ Pre-Packed & Ready-To-Use: Eliminates onsite batching variations, saving time and ensuring quality.

Conbextra GP4 is typically used in situations where static and dynamic loads are expected and high-performance structural grouting is critical:
1. Grouting of large machinery baseplates (turbines, compressors, pumps).
2. Bridge bearing pedestals and structural supports.
3. Heavy equipment foundations and crane rails.
4. Anchoring bolts, masts, and tower foundations. 
5. Critical structural fixings and industrial grouting applications. 

• Gap thickness: Can typically be placed up to ~100 mm in a single pour when used as an underplate grout. 

• Flow & Strength: Designed for good flow properties and very high compressive and flexural strength, suitable for heavy loading conditions.

• Dimensional stability: Dual shrinkage compensation helps maintain contact with substrates and foundations.

• Supplied in pre-measured bags of dry powder.

• Just add clean water and mix to achieve the desired free-flow or slightly thicker consistency before placing.

Conbextra GP4 is a premium cementitious precision grout in the Fosroc range — engineered to deliver high strength, non-shrink performance, excellent flow, and dimensional stability for heavy-duty and critical structural grouting applications in infrastructure, industrial and engineering projects. 

 #fosroc#fosrochemicals#waterproofing #floorhardener #epoxy #coating #waterproofingsolutions #membranbakar #membranebakar #sika #waterproofingspecialists #jasawaterproofing #waterproofingnoida #waterproofingspecializecompany #waterproofingdelhi#waterproofingexperts #waterproofingmembrane #shell #membraneaspalt #injection #waterproofingmembrane #unigeco #sealant #bitumen#waterproofingchemicals #waterproofing #builders #tileadhesive #concreteadmixture #sangli #fluiddispensing #architecture #coolants #higherconsciousness #insulationmaterial #lubricants #smartdispenser #waterproofingcontractors #technologytrends #waterproofingservices #cleaningequipment #civilcontractors #plastercontracter #sentering #glassfibermesh #powdercoatings #powderpaint #synthetics #chemtrails #adhesive #processengineering #chemicaltrails #chemical #chemicalbusiness

• Nitobond EP Std is a two-component, solvent-free epoxy resin bonding agent supplied in pre-weighed “kit” form (resin + hardener). 

• It’s designed to bond new concrete or mortar to existing cementitious substrates — i.e. old concrete, masonry, or repair flooring — ensuring strong adhesion and structural integrity. 

• Bonding fresh or new concrete/mortar to existing concrete or masonry surfaces.

• Structural repairs: overlays, floor toppings, patch repairs, grouting of dowel bars or starter bars, industrial floor repair, bonded or granolithic floor toppings. 

• Suitable for both horizontal and vertical surfaces, including situations where formwork supports the new layer

• Can be used indoors or outdoors; on dry or slightly damp (SSD) concrete surfaces. 

Here are typical technical data / performance metrics of Nitobond EP Std (at ~20 °C unless specified):

• The two components (base + hardener) must be mixed thoroughly. Usually the hardener is poured into the resin/base container and mixed until a uniform colour is achieved — visual cue (“base white + hardener green → uniform grey/colour”) ensures proper mixing. 

• Substrate must be clean, sound, free of dust/laitance/loose material, oil/grease, paint, coatings, etc.. Often the surface is roughened (light scabbling, wire-brushing or grit-blasting) to expose aggregate for better bond. 

• Once mixed, apply by brush (or spray with suitable equipment) to prepared surface. 

• After application, new concrete or mortar should be placed within the overlay/open time window — before the epoxy skin forms and while still tacky. For standard grade: ~90 min at 20 °C; for some slow-set versions, overlay time may be longer (depending on temperature and ambient conditions). 

• A two‑component epoxy zinc‑rich primer, combining metal zinc and epoxy resin to form a protective coating.
  
  🧪 What It Is

•  

  • A two‑component epoxy zinc‑rich primer, combining metal zinc and epoxy resin to form a protective coating.

  • 🛠 Primary Purpose

     

    • Anti‑corrosion protection for exposed steel reinforcement prior to concrete repair or overlay works.

• Active zinc‑rich system provides electrochemical (galvanic) corrosion protection.

•  Excellent adhesion to steel, helping bond subsequent repair materials.

• Quick drying — surface usually touch dry in 30–45 minutes depending on temperature.

• Easy to mix and apply by brush, roller or spray. 

• Compatible with Fosroc concrete repair mortars and micro‑concretes.

• Primer coat on bare, cleaned or prepared steel reinforcement before patching or reinstating concrete.

• Protective primer for steel structures embedded within concrete to inhibit corrosion and prolong service life

• Coverage: ~4–5 m² per litre per coat (theoretical).

• Recommended thickness: ~40 µm dry film per coat.

• Packaging: Typically available in 1 L and 5 L kits.
  
  💡 In summary: Nitozinc Primer is a specialized epoxy zinc‑rich corrosion protection primer for steel used in concrete repair situations, helping ensure reinforced elements are protected from rust before application of repair mortars. 

• Materials: Extruded from a high-grade PVC compound for flexibility and longevity. 
• Sealing principles: Employ both the valve principle (using bulbs) and the tortuous path principle (with a complex cross-section) to prevent water passage. 
• Types: Include centrally placed and externally placed profiles like Hydrofoil, Watafoil, Rearguard, and Angleguard. 
• Applications: Suitable for construction, expansion, and contraction joints. 
• Installation: Can be joined on-site through heat welding, and proper installation is crucial to ensure they remain in position during concrete pouring. 
• Compliance: Supercast PVC complies with BS 2571 - 1990, Class 3, Type 20mm. 

• A Technical Data Sheet (TDS) summarizes the product's best knowledge, including usage and application based on available information.
• An SDS, providing safety information, is also available from the Fosroc website.
• It is important to read both the SDS and TDS carefully before use, as application or performance data may change. 

Lokfix products are pre‑measured, two‑component resin anchor grouts — typically polyester or vinylester resins — that cure to form high‑strength, corrosion‑resistant anchorage for fixing elements into structural substrates. They come in ready‑to‑use cartridges or pails and are mixed on‑site as required.

• High bond strength for secure anchoring of fixings. 

• Rapid strength gain — allows early application of load after installation.

• Corrosion‑resistant properties help protect embedded steel in aggressive environments.

• Non‑expansive — does not place undesirable stress on surrounding substrate.

• Vibration‑resistant and durable under dynamic loads.

• Can be used in dry, damp, or water‑filled holes depending on grade.

• Available in different grades like pourable, thixotropic, and cartridge formats for tailored applications.

Lokfix is used for anchoring and fixing structural elements in a wide range of construction and civil engineering scenarios:
1.  Anchoring threaded rods, bolts and dowels into concrete and masonry.
2. Post‑installed reinforcement fixings (e.g., starter bars). 
3. Installation of base plates, barriers, balustrades, railings and safety fences.
4. Ground anchors for towers, cranes and dock sills. 
5. Horizontal, vertical and overhead installations depending on product grade. 

Fosroc Lokfix is available in several formulations to suit different conditions and loads: 
Anchoring / resin grout types: 

1. Hole Preparation: Drill hole to required depth and clean thoroughly.

2. Resin Mixing: Mix the two resin components (or use pre‑packaged cartridges with static mixer).

3. Placement: Inject resin into hole, then insert threaded rod/bolt/rebar.

4. Cure: Allow to cure; the resin sets to form a strong, chemical bond.

5. Load Application: Once cured, the fixing can take tension, shear, and dynamic loads. 

Conbextra HF is a ready-to-use cementitious grout supplied as a dry powder that becomes a highly fluid grout when mixed with clean water. It’s formulated to flow easily into narrow gaps between structural elements and does not shrink as it cures, ensuring full contact with the substrate.

• High flowability: Very fluid grout that can fill gaps and voids effortlessly.

• Non-shrink: Dimensionally stable with controlled expansion to compensate for shrinkage in both plastic and hardened states.

• High early and long-term strength: Achieves strong mechanical performance after setting.

• Chloride-free: Safe for use where corrosion of reinforcement is a concern.

• Suitable for pumping: Can be applied by pumping or pouring. 

• Mixes easily: Just add a measured amount of water — no complex additives needed.

• Low bleeding/segregation: Maintains uniform consistency.
  
  
  

  🏗️ Common Uses

  Conbextra HF is typically used for free-flow grouting of structural gaps and precision applications such as:

  • Grouting of large stanchion base plates and machinery bases.

  • Grouting joints in precast concrete panels.

  • Anchoring reinforcing steel bars and tie bars.

  • Applications where access for pouring is limited. 

  • Pumped grouting where extended flow is needed.
    
    
    

    📏 Technical Standards

    Conbextra HF conforms to international standards including:

    • BS EN 1504-3 Class R4: Structural repair and precision grouting.

    • BS EN 1504-6: Anchoring of reinforcing steel bars.

    • ASTM and U.S. Corps of Engineers specifications for non-shrink grout in many regions.
      
      
      

• Gap thickness: 10 – 100 mm (up to ~125 mm depending on region).

• High compressive strength: Often 60-77 MPa after 28 days (varies with mix).

• Hydrogen-free expansion: Helps avoid cracking and voids.

1. Non-Shrink: Once applied, it doesn’t shrink, which is crucial to maintain the structural integrity of the surface it's applied to.

2. High Strength: It has a high compressive strength, making it ideal for heavy-duty applications where the grout will be subject to substantial load-bearing stress.

3. Fluid Consistency: It’s easy to pour and can be used for both large and small spaces. Its fluid consistency allows it to flow into the spaces without needing excessive mixing or vibration.

4. Versatile Application: Can be used for grouting under heavy machinery, bridge bearings, filling gaps around anchor bolts, and more.

5. Fast Setting: Conbextra GP2 typically sets quickly, helping with faster construction timelines.

• Machinery foundations: Used to grout machinery baseplates and heavy equipment.

• Bridge bearings: Often used in the grouting of bridge support systems.

• Precast concrete elements: Filling gaps between precast concrete elements or securing steel reinforcements.

• Anchor bolts: Grouting around anchor bolts and other fixings.

• Mixing: Fosroc Conbextra GP2 is typically mixed with water to form a slurry-like consistency. The quantity of water added affects the consistency and flowability.

• Placement: It should be placed quickly and must be vibrated or packed to eliminate air pockets. After placement, it should be left to cure, forming a solid bond with the surrounding materials.

• Durability: Once set, the grout is highly resistant to wear, making it suitable for industrial and heavy-duty applications.

• No Shrinkage: It remains stable after setting, reducing the need for reapplication or repair.

Fosroc Conbextra GP5 is a ready-to-use, ultra high-strength, cementitious precision grout that is non-shrink and free-flowing when mixed with a controlled amount of water. It’s designed for critical grouting applications where extremely heavy loads, vibrations and dynamic forces occur.

✔ Non-shrink — expands slightly in the plastic state to completely fill voids without shrinkage.
✔ Ultra high strength — develops very high compressive strength for heavy load support. 
✔ Free-flowing — excellent flowability for filling tight gaps and undercut areas.
✔ Low water demand — helps achieve high early and long-term strength.
✔ Dual shrinkage compensation — compensates for shrinkage both in plastic and hardened states.
✔ Chloride-free & iron-free — prevents corrosion and staining.

This grout is ideal for precision and heavy load bearing grouting in situations such as:
Grouting base plates and bolt pockets of turbines and compressors
Grouting heavy machinery foundations (e.g., pumps, generators)
Crane rails and transport equipment installations
Heavy reciprocating machines (mills, presses, shearing machines)
Steel rolling mill beds and large plant machinery bases
Bridge bearing pedestal and other critical structural components

• Designed for gap thicknesses up to ~150 mm when mixed correctly.

• High early and ultimate strength development without chlorides.

• Excellent resistance to dynamic loads (e.g., machinery vibrations).

Conbextra GP5 is formulated from Portland cement, graded fillers and chemical additives that impart controlled expansion and help produce a uniform, durable grout with high mechanical performance.

• Supplied as a pre-packaged dry powder.

• Mix with clean water to the specified ratio.

• Once placed, it flows into the void, fills completely, and sets with minimal shrinkage.

Fosroc Cebex 100 is a high-performance chemical admixture designed for use in concrete and mortar applications. It is specifically formulated to act as a water-reducing agent, enabling better workability and durability in construction projects. Here's a detailed breakdown of its properties and uses:

• Water Reducer: Cebex 100 is a superplasticizer that improves the workability of the mix by reducing the amount of water required in the concrete mix. This allows for a higher strength concrete without compromising the ease of handling.

• Improves Durability: The admixture helps improve the overall durability and long-term performance of the concrete. It reduces the permeability of the concrete, making it more resistant to the ingress of harmful chemicals, such as chlorides and sulfates.

• Enhanced Strength: By reducing water content in the mix, the product leads to higher compressive strength of the final concrete. This is particularly beneficial in high-strength concrete applications where performance and load-bearing capacity are critical.

• Versatility: Cebex 100 is suitable for a wide range of concrete applications, including foundations, slabs, roads, and high-rise buildings. It's often used in projects requiring enhanced concrete quality and longevity.

1. Concrete and Mortar: It can be added to concrete or mortar for improving its workability, reducing water content, and increasing strength.

2. High-Performance Concrete: It's ideal for high-strength and high-performance concrete mixes.

3. Precast Concrete: The product is also beneficial for precast concrete elements that require superior strength and durability.

4. Shotcrete: Cebex 100 can be used in shotcrete applications, improving the cohesiveness of the mixture, leading to better application.

• Improved Workability: The admixture ensures that concrete or mortar remains workable for longer periods, making it easier to place and finish.

• Reduced Water-Cement Ratio: A lower water-cement ratio means better strength, reduced shrinkage, and increased resistance to cracking.

• Enhanced Durability: The finished concrete shows better resistance to chemical attacks, freeze-thaw cycles, and wear and tear.

• Cost-Effective: Since the admixture reduces the need for extra water, it may reduce the overall costs of the mix without sacrificing quality.

• Recommended dosage: The typical dosage for Cebex 100 is around 0.5–2.0% by weight of the cement content. However, the exact dosage will depend on the specific project requirements, environmental conditions, and the type of concrete or mortar being mixed.

• Adjustment: It's always advised to perform trials to determine the optimum dosage for your specific conditions.

• Cebex 100 can be used in combination with other Fosroc admixtures, including retarders, accelerators, and air-entraining agents, as long as compatibility is checked.

• Fosroc Cebex 100 is typically supplied in liquid form and is available in various sizes (e.g., 20-liter drums, bulk containers).

• It should be stored in a cool, dry place, away from direct sunlight and extremes of temperature.

• Handling: As with all chemical products, protective gloves and eyewear should be worn when handling Fosroc Cebex 100 

1. Non-Shrink Properties:

   • Non-shrink formulation ensures that the grout does not shrink after it is placed, which helps in maintaining the integrity of the connection or joint being grouted.

   • This is critical in applications like grouting machinery baseplates or foundation bolts, where shrinkage could lead to misalignment or loss of load transfer.

2. High Compressive Strength:

   • Fosroc Conbextra TS achieves high compressive strength shortly after setting. This makes it suitable for applications requiring high load-bearing capacity and early strength development.

3. 1. Free-Flowing:

      • It is a free-flowing grout, which means it can easily fill complex voids and gaps without the need for excessive vibration or manual compaction. This is ideal for intricate spaces like anchorage areas and tight gaps between structural elements.

   2. Excellent Bonding:

      • The grout bonds well to steel and concrete, creating a durable, high-strength connection between the components. It ensures long-term stability in the joint or gap, helping to avoid issues such as cracking or detachment over time.

   3. Durability:

      • Conbextra TS is designed to be durable in harsh environments, offering resistance to a range of chemicals, moisture, and thermal cycling, making it suitable for both indoor and outdoor applications, including industrial and marine environments.

   4. Ease of Use:

      • It is easy to mix and apply, and it requires minimal effort to achieve a good finish. It is generally available in powder form and can be mixed with water to form a thick, pourable consistency.

      • The grout can be applied with a pump, trowel, or by pouring, depending on the application.

   Typical Applications of Fosroc Conbextra TS:

   1. Machine Foundations:

      • Used to fill gaps between baseplates of machinery and concrete foundations, ensuring precise alignment and stability. The grout’s high strength and non-shrink properties ensure that the machinery remains firmly anchored over time.

   2. Anchor Bolt Grouting:

      • Conbextra TS is often used around anchor bolts in both new construction and repair work. It provides a strong bond between the steel bolts and concrete, ensuring they are securely locked into place.

   3. Structural Connections:

      • Ideal for grouting areas where structural elements like precast beams, columns, or bridge components need to be connected or anchored to the foundation or other parts of the structure.

   4. Repair Work:

      • It is also used for the repair of concrete structures, filling voids in pavements, roads, and floors, where it restores the load-bearing capacity and surface integrity of the structure.

   5. Gap Filling in Civil & Industrial Structures:

      • Used for filling larger voids, especially where a durable, high-strength grout is needed for long-term performance under heavy load

   
   
   
   

    

Fosroc Conbextra GP3 is a ready-to-use dry powder grout that, when mixed with clean water, produces a free-flowing, non-shrink, high-strength grout. It is formulated using Portland cement, graded fillers, and chemical additives that provide controlled expansion in the plastic state and reduce water demand, helping achieve high early strength and excellent final strength. 

✔ Non-shrink: Expands slightly in the plastic state to ensure full contact with the surface and avoids settlement or voids.
High early and ultimate strength: Designed to develop strong mechanical properties quickly and remain durable over time.
✔ Free-flowing: Flows easily into tight gaps and under baseplates without segregation. 
✔ High load capacity: Able to withstand static and dynamic loads, important for structural and machinery foundations.
✔ Chloride-free (in many formulations): Safe for use around reinforcement, reducing corrosion risk.
✔ Pre-packed mix: Factory-controlled quality — just add water on site.

Conbextra GP3 is used in precision grouting applications where strength and reliability are critical: 
1. Grouting of base plates for turbines, compressors, pumps, and heavy machinery 
2. Large void filling under precast structures.
3. Anchoring fixings such as anchor bolts, masts, fence posts, and reinforcement bars. 
4. Structural support applications in power plants, industrial and infrastructure projects. 

• Gap thickness: Suitable for grouting gaps up to about 100 mm in one pour.

• High mechanical strength: Builds strong compressive and flexural strength to support heavy loads. 

• High mechanical strength: Builds strong compressive and flexural strength to support heavy loads. 

• Excellent bond and durability: Provides reliable load transfer and contact area, enhancing structural performance. 

1. Mix: Add clean water to the dry powder at the recommended ratio. 

2. Place: Pour the grout into gaps, under baseplates, or around fixings while still fluid to ensure full contact. 

3. Cure: The grout cures into a high-strength, durable solid that maintains dimensional stability. 

✔ Epoxy resin based (two-component) formulation with base and hardener.
✔ Low viscosity / free-flowing grout ideal for narrow gap filling (0.25 mm to 10 mm).
✔ High mechanical strength — develops high compressive, tensile and flexural strength as it cures, making it suitable for dynamic load applications.
✔ Non-shrink — ensures full surface contact and uniform load transfer.
✔ Excellent chemical and environmental resistance — stable under exposure to oils, grease, mild acids/alkalis and water.
✔ Low creep characteristics under sustained loads.

🔹 Underplate & base plate grouting — filling small gaps between machinery baseplates and concrete foundations.
🔹 Dynamic/repetitive load areas — turbines, reciprocating machinery, testing equipment, heavy crane rails, transporter rails. 
🔹 Crack injection — structural and static cracks in concrete and masonry.
🔹 Heavy industrial installations — steelworks, refineries, chemical plants and electroplating works. 

📊 Typical Performance Properties 
Density: ~1060 kg/m³.
Compressive strength: ~57 MPa at 1 day, ~66 MPa at 3 days, ~83 MPa at 7 days.
Indirect tensile strength: ~15 MPa @ 7 days.
Flexural strength: ~30 MPa @ 7 days.
Pot life: ~20 min @ 20 °C (varies with temperature).

Conbextra EP10 is mixed onsite by combining the epoxy base and hardener. The low-viscosity mixture can penetrate narrow gaps and hairline cracks, ensuring complete contact with substrate surfaces before it cures. Its epoxy chemistry provides strong adhesion to concrete and steel, excellent early-age strength gain, and long-term durability under both static and dynamic loads.

✔ High strength and durability for structural support and load transfer.
✔ Chemical resistance for industrial environments.
✔ Free-flowing and easy to place without vibration in thin gaps. 
✔ Non-shrink to maintain contact and load distribution.
✔ Low creep helps maintain alignment over time.  

Fosroc Conbextra EP10 is a high-performance epoxy resin grout ideal for small gap grouting (up to ~10 mm), crack injection and dynamic load areas, offering high mechanical strength, chemical resistance, non-shrink characteristics and reliable performance in demanding industrial and structural conditions.