Call 08048965804 80% Response Rate

Send Email

Kryton Waterproofing Products

Leading Wholesale Trader of krystol internal membrane kim, kryton krystol t2 and kryton krystol t1 from Ghaziabad.
Krystol Internal Membrane Kim

Krystol Internal Membrane Kim

Product Price: Rs 220 / KgGet Best Price

Product Brochure

Product Details:
BrandKryton Buildmat Co. Pvt. Ltd
Packaging TypeResealable Pails
Packaging Size5 kg,25 kg
ColorLight Gray
FormPowder
Specific Gravity2.8
Manufactured ByKryton
Particle Size40 to 150 microns
Bulk Density1.4 g/cm3

Krystol Internal Membrane or KIM is an integral crystalline concrete waterproofing admixture; and a PRAH (Permeability Reducing Admixture  Hydrostatic Conditions). When combined with water, KIMs proprietary chemicals react to form millions of needle-like crystals. These crystals grow and fill the capillary pores and micro-cracks in the concrete, blocking the flow of water. As time passes and stresses form new cracks, any incoming moisture causes the crystals to reactivate  ensuring continuous waterproofing over the years.

KIM is simply added to the concrete during mixing at the plant or on-site. Once mixed, it becomes an integral part of the concrete and no extra labour is required for handling or usage. It is compatible with most superplasticizers.

Get Best QuoteRequest A Callback
Kryton Krystol T2

Kryton Krystol T2

Product Price: Rs 185 / KgGet Best Price

Product Brochure

Product Details:
BrandKryton Buildmat Co. Pvt. Ltd
Packaging Size25 Kg
ColorGray
Usage/ApplicationConcrete Foundations, Walls and Slabs, Elevator Pits and Equipment Pits, Parking Structures, Swimming Pools, Rooftops, Roof Decks etc
FormDry Powder
Packaging TypeResealable Pails
Shelf Life3 years
Ph Value12
Manufactured ByKryton
Hardening Time4 hours (slurry)
Working Time60 minutes with continued stirring (slurry),30 minutes (dry pack)
Bulk Density1.4 g/cm3
  • It is a surface-applied crystalline waterproofing treatment for concrete structures that is used to protect against the ingress of water.
  • When mixed with water becomes a coating that is applied to the inner or outer surface of the concrete structure.
  • It is used in conjunction with Krystol T1 as a second coat or for coating on existing concrete surfaces for negative side waterproofing.  
  • It contains Kryton’s unique and proven Krystol technology which reacts with un-hydrated cement particles to form millions of needle-like crystals.
  • These crystals grow in a catalytic reaction, filling the naturally occurring pores and voids in concrete, and permanently blocking the pathways for water and waterborne contaminants.
  • Later, if cracks form due to settling or shrinkage, incoming water triggers the crystallization process and additional crystals form, filling cracks and ensuring that the structure’s waterproofing barrier is maintained and protected.
  • The concrete itself becomes the waterproof layer removing the need for any surface treatment.

Features and Benefits:
  • Replaces unreliable exterior membranes, liners and coatings
  • Reaches well below the surface and is not affected by surface wear or abrasion
  • Self-seals hairline cracks up to 0.5 mm (0.02 in.)
  • Reactivates in the presence of moisture
  • Waterproofs from any side i.e. positive or negative side (along with Krystol T2)
  • Treatment may be applied to old or new concrete
  • Safe for contact with potable water
  • Permanently waterproofs the concrete
  • Increases reliability and quality control
  • Lowers the cost of waterproofing
  • Increased durability reduces building maintenance and repair costs
  • Impervious to physical damage and deterioration
  • Protects against corrosion
  • Superior performance
Get Best QuoteRequest A Callback
Kryton Krystol T1

Kryton Krystol T1

Product Price: Rs 185 / KgGet Best Price

Product Brochure

Product Details:
BrandKryton Buildmat Co. Pvt. Ltd
Usage/ApplicationConcrete Foundations, Walls and Slabs, Marine Structures, Elevator Pits and Equipment Pits, Parking Structures, Swimming Pools, Rooftops, Roof Decks etc
Packaging Size25 Kg
ColorGray
FormDry Powder
Packaging TypeResealable Pails
Shelf Life3 years
Ph Value12
Working Time60 minutes with continued stirring (slurry),30 minutes (dry pack)
Bulk Density1.36 g/cm3
Manufactured ByKryton
Hardening Time5 hours (slurry),3 hours (dry-pack)
Krystol T1 is a surface applied system that can be used as a single coat or as part of a double coating system. It can be applied with brush or spray and is also used as dry shake on new or existing concrete.
Krystol T1 is effective on the positive side as a single coating and the negative side in combination with T2. It seeps into the concrete through micro-cracks making the entire concrete a waterproof barrier
    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Contact Us
     
    Thank youYour Enquiry has been sent successfully.
    © Shiv Sons. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.