Shiv Sons

• Ensures economical durable & optimal waterproofing & protection for exposed roofs, pitched roofs, balconies, terraces, sunshades,
• Thixotropic cold applied component
• Elastic material hence provides good crack bridging.
• Highly economical due to supply in a ready to use form and no wastage of material
• Good UV resistance.

Expansive Plasticized Grouting Admixture

Plasticizes the grouting mortar• Avoids segregation and improves cohesion• Reduction in water content of the mix• Generates micro gas bubbles so that an optimum expanding and jointing effect can be achieved.• Does not contain chloride or any other substance harmful to concrete or steel

"Ready-to-use colorless, hydrophobic impregnation with deep penetrating property on silicone basis"
Description:

Nisiwa-SH is ready to use colorless hydrophobic impregnating coating with deep penetrating properties on Silicone bases.

Nisiwa-SH does not seal surface pores and maintains the original breathing capacity of bricks and stone facade.

Recommended uses: 

For natural stones & bricks or any porous substrate used in facade

Where natural look of the stone is to be maintained

Apply Two Coats by brush

Ensure no moisture is there in stone or brick surface

• Crack Bridging Water proof coating for concrete surfaces on the basis of modified Polyurethane resin.
• Resistance to Oxidation
• Seamless membrane with an Excellent Water Vapor Barrier Properties
• Weathering and ultra violet (UV) resistant and long-term aging stability
• Environmentally friendly, Non-Toxic
• Cured Membranes are highly flexible even at extreme temperature
• Single component, Cold applied, Application by roller or spraying
• It confirms to ASTM C-836 & ASTM C-898

• Emceflex 30 is a multi-purpose acrylic polymer based admixture, which is specially formulated for the construction Industry.
• It is a very versatile material and can be used as surface sealer, dustproofer and as an additive for sand/cement mortars for waterproofing and concrete repairs.
• Emceflex 30 admixed concretes or mortars exhibit higher abrasion resistance and enhanced imperviousness to water.

Emcekrete-Type A is a ready to use cement based Polymer Modified micro concrete for use in repair systems.

Emcekrete-Type A is a non-shrink free-flow,micro concrete which can be used for repairs, especially when thicker overhead repairs are desired.

Emcekrete- Type A can be poured into the erected formworks and bonds thoroughly to the existing surfaces on account of its polymer contents.

• Emceflex 30 is a multi-purpose acrylic polymer based admixture, which is specially formulated for the construction Industry.
• It is a very versatile material and can be used as surface sealer, dustproofer and as an additive for sand/cement mortars for waterproofing and concrete repairs.
• Emceflex 30 admixed concretes or mortars exhibit higher abrasion resistance and enhanced imperviousness to water.

• "Multipurpose acrylic polymer based waterproofing and repair mortar admixture"

• Emceflex 15 is a multi-purpose acrylic polymer based admixture, which is specially formulated for the construction Industry.
• It is a very versatile material and can be used as surface sealer, dust proofer and as an additive for sand/cement mortars for waterproofing and concrete repairs.
• Emceflex 15 admixed concretes or mortars exhibit higher abrasion resistance and enhanced imperviousness to water.

• Waterproofing of basements, sunken slab of toilets, terraces, roofs, etc.
• Admixtures for repairing concrete, masonry, surfacing and renders in conjunction with cement
• Repair component for repairing spalled concrete, floors, cantilever, domes, sunken slabs for water closets, etc.
• Bonding additive for new to old concrete
• Admixture for cement based exterior coating
• Bonding additive for tile fixing
• Second component of Dichtament DS-Flex flexible waterproofing system

• Outstanding waterproof and damp proof coat for concrete structures, brick and masonry works, cement renders, plasters
• Underground shafts and garages, retaining walls, tunnels, water tanks, roof slabs, sewers and basements
• Resurfacing of bathrooms, cellar walls and floors exposed to dampness and attacks from moss and fungus
• Foundation walls and footings subjected to ground moisture, water and salt efflorescence can be well protected with coating of Dichtament® DS2

• Low-viscosity polyurethane-based elastomer resin
• Unlimited processing time without contact with water
• Fast reaction on contact with water
• High volume increase within a few seconds
• Stops pressurised water
• Phthalate plasticiser-free
• REACH exposure: water contact permanent, inhalation periodic, processing and application
• Environmental Product Declaration EPD

• Stopping water leakages in water and sewage structures
• Temporary sealing of heavily water-bearing cracks before permanent sealing injection with MC elastomer resins MC-Injekt 2300 top or MC-Injekt 2300 flow

Liquid membrane forming compound for curing concrete

• Emcoril / Emcoril White can be used everywhere, where an efficient curing is required. It is very suitable for large areas ofconcretes that are directly exposed to sunlight, heavy winds and other environmental influences.• Minimizing the shrinkage cracks on account of curing at early stages• Optimal hydration leading to stronger end-hydration productsLiquid membrane forming compound for curing concreteend • Helps achieve proper compressive and flexural strengths• Single application thereby saving of labour costs• Enables better quality control at sites• Reduces the surface dusting• Increases the surface hardness of the concrete• Does not affect the normal setting process of cement• Ideal for curing at places having water shortage, Eliminates the need for 28 days water spraying, hessian, PE films, etc.• Easy to apply, Curing can be carried out soon after concreting therefore no extra labour required• Better solar reflectance lowers the temperature of concrete, prevents thermal stress and cracking