Non Metallic Floor Hardener

Product Details:

Product Details:

• It is a ready-to-use factory processed and specially graded non-oxidising, non-metallic and mineral aggregate dry shake surface hardener free from oil and grease.

• Provides build in wear resistance and produces high abrasion resistant floor surface.
• Impact resistance twice that of plain concrete.
• Three times greater surface density than plain concrete which increases resistance to penetration by oil, grease, hydraulic fluids, ethylene, glycol and many industrial chemicals.
• May be used for open and continuously wet areas.
• Non-rusting and easy maintenance.
• Fast construction with minimum site costs for materials handling and non bonding problems.

Product Details:

• They are quality controlled, factory blended powder which are ready to use on site.
• They contain special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size.
• These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface of fresh, wet concrete.
• They cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant.
• Monolithic cure ensures that problems normally associated with thin 'granolithic' screeds, viz., shrinkage, cracking, etc., are completely overcome.
• Being non-metallic, they provide a non-slip surface which will never rust and disintegrate

• It provides a highly abrasion resistant surface to concrete floors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete.    
• They are ideally suited for all industrial areas subject to the heaviest traffic, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways.

• Non metallic - does not rust or stain
• Provides a hard, abrasion resistant surface
• Forms monolithic bond with base concrete
• Easy and economical to apply

Product Details:

It is a specially manufactured metallic aggregate admixture with cement and stone/granite chips to provide the hardest surface to floorings and pavement which will remain wearproof, dustproof, waterproof and oil-proof etc.
Uses: By the use, the flooring and paving topping can be made hard surface which almost become wear and dust proof.It is ideally suited for use in all types of industrial floors which are subjected to heavy traffic and load movement.   It can also withstand the impact load due to movement of heavy load over the floor toping. It does not allow any dampness or absorption of water and easy to clean by washing as the surface remains smooth without any hole or crevice etc.