Call 08048025232 57% Response Rate

Send Email

Pipe Wrapping Tape

  • Pypkote 4 mm is aPipeline Corrosion Resistant Tapeconforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a fabric of high tensile strength Fibreglass. ... Tape is terminated on both exteriors by thermofusible HMHDPE Film which aids in the installation process.
Pypkote

Pypkote

Product Price: Rs 150 / Square MeterGet Best Price

Product Brochure

Product Details:
Backing MaterialRoll
Tape Width>100 mm
BrandIWL India Limited
Usage/ApplicationBinding
Size2 inch
Quantity Per PackROLL
Tape LengthMETER
Water ProofYES
Temperature Range65 TO 121

Anti Corrosion Tapes Offering you a complete choice of products which include anti corrosion tapes.



Additional Information:

  • Item Code: 68079010
  • Delivery Time: SAME DAY
  • Packaging Details: ROLL
Get Best QuoteRequest Callback
Pypkote

Pypkote

Product Price: Rs 250 / Square MeterGet Best Price

Product Brochure

Product Details:
Tape Width>100 mm
Tape Length10-20 m
TypeSingle Sided
BrandIWL India Limited
Usage/ApplicationBinding
MaterialPolyester
ColorBlack
Elongation200%
Manufactured ByIWL india ltd
Packaging TypeRoll
Width150mm,250mm,500mm,1000mm
Filler20 to 30%
Softening Point65 to 121 deg C

Pypkote is a pipeline corrosion resistant tape conforming to IS:10221 appendix B specification.It comprises of a tar based polymeric mix supported on a fabric of high tensile strength fibreglass.The polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing.
Tape is terminated on both exteriors by thermofusible HMHDPE Film which aids in the installation process.
Application is fast and easy.
The pipe surface is first cleaned with a wire brush.
IWL CS is applied on pipes immediately after cleaning.
This is to prevent any further accumulation of rust on the pipe.
After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry.
Before adhering the tape to the pipe, it is advisable to gently heat the primercoated pipe by a run of LPG torch.
The bottom surface of the tape is heated by LPG Torch or any heat source.
The tape is wrapped either by spiral or circumference method over the pipe.
By heating the primercoated pipe and by removing the bottom polyethylene from the tape before wrapping, better adhesion between the tape and pipe is obtained.
Overlaps are maintained with a minimum of 12 mm.
A final coat of white wash is done immediately over the entire coated pipe.
Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed.
The procedure for application of tape is the same as bare pipe procedure.
Overlapson each side of the weld joints are to be 50 mm.



Additional Information:

  • Item Code: 6807
Get Best QuoteRequest Callback
TankMastic

TankMastic

Product Price: Rs 1,800 / UnitGet Best Price

Product Details:
BrandSTP Limited
Usage/ApplicationMetal
Packaging Size20kg
Coverage.200
Typestp
ColorBlack
Service CityGhaziabad
FormLiquid
TankMastic is a specially formulated anti-corrosive, tasteless, odourless, nontoxic and black bituminous coating for protecting the internal surface of storage water tanks, pipes, etc. from corrosion. It conforms to IS: 9862/1981 as well IS: 158/1981.

Additional Information:

  • Item Code: 2715
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Pipe Wrapping Tape"?
Thank youYour Enquiry has been sent successfully.
© Shiv Sons. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.