STP Ltd - Waterproofing Chemicals

Providing you the best range of stp shalikote t-10, stp limited waterproofing products, shalifloor m dh non oxidizing metallic floor hardener, shalicryl lm waterproofing coating, shalicem ewp and stp shalikote t10 with effective & timely delivery.

STP Shalikote T-10

Request Callback

₹ 67 / Kg Get Latest Price

Product Brochure
Packaging Size20 ltr
BrandSTP
Available ColourBlack
Provide Home PaintingNo
Packaging TypeBucket
Finish TypeSmooth
Usage/ApplicationIndustrial
ShaliKote® T-10 / ShaliKote® T-10A is water based bituminous emulsion with finely divided bitumen dispersed in water and is ready for application on wet surfaces.

Application

ShaliKote® T-10 / ShaliKote® T-10A is recommended for waterproofing of leaky walls / surfaces or places where heating of bitumen is not desirable or prohibited.

Advantages

ShaliKote® T-10 gives a coating, which, when set, is impermeable to water and remains unaffected by attacks of industrial fumes, saline atmosphere, etc. It resists low temperature cracking and also does not crack under the influence of strong sunlight. ShaliKote® T-10A has smoother finish and better flow as compared to ShaliKote® T-10. Application Methodology • Wire brush and clean the surface thoroughly to remove all dirt and loose particles. • Dilute ShaliKote® T-10 from its pasty consistency to light consistency by adding water in the ratio of 1:1. Apply this diluted material on the roof surface as primer. No dilution should be done in case of ShaliKote® T-10A. • When the primed surface is dry and has turned black from its original brown colour, apply ShaliKote® T-10 and allow the emulsion to break. It will turn black from its original brownish colour. • When the emulsion has set in, spread coarse sand or crushed stone chips over the surface

Stp Limited Waterproofing Products

Request Callback

₹ 125 / Kg Get Latest Price

Product Brochure
ColorBlack
BrandStp Ltd
Packaging Size20L
Form Of PaintLiquid
Packaging TypeDrum
Paint Base TypeBitumen Based
Application MethodBrush
Is It WaterproofYes
ShaliTex Primer is a solvent based bituminous primer that seals pores in surfaces such as concrete and improves the adhesion of bituminous materials that are to be applied to the substrate. It is suitable for brush or spray application. It conforms to the requirement of IS: 3384-1986.
Shalitex primer ,STP Shalitex primer, Shalimar Shalimar primer,, Black STP Shalitex primer Bitumen based.

We are Dealing in Noida, Kanpur, lucknow, Ghaziabad, Delhi, jaipur, Chandigarh, Ambala, Punjab, Himachal,  Jammu and Kashmir. 

ShaliFloor M DH Non Oxidizing Metallic Floor Hardener

Request Callback

₹ 30 / Kg Get Latest Price

Product Brochure
Packaging Size25 Kg
Usage/ApplicationFlooring
Packaging TypeBag
FormPowder
Purity100%
haliFloor® M DH (formerly known as Shalimar Diamond Hard) is a single component, preblended, metallic floor hardener consisting of cleaned, graded, non-oxidizing metallic aggregates, pigments and admixtures.

ShaliFloor® M DH provides a dense and tough surface capable of withstanding abrasion and impact loading, making it suitable for industrial and other heavy duty floors.

We supply high-performance floor hardeners — both metallic and non-metallic — ideal for increasing surface durability, abrasion resistance, and impact strength of concrete floors.

 

Our floor hardeners are trusted in industrial, warehouse, commercial, and heavy-traffic flooring applications, and conform to IS 1237 & ASTM C779 standards.

 

Metallic & Non-Metallic Floor Hardeners – Industrial Grade

🏷️ Top Brands We Offer:

STP Ltd – ShaliFloor® M DH (Metallic), ShaliFloor® NM (Non-Metallic)

 

CICO Technologies – Surface Hardener, CICOFLOOR TOP RTU (M/NM)

 

Fosroc Chemicals – Nitoflor Hardtop Standard

 

Sika India – Sikachapdur IN

 

UltraTech Cement Ltd – SmartTop (Metallic/Non-Metallic)

 

Key Features:

Pre-mixed, factory-ready dry shake

 

Increases compressive strength and abrasion resistance

 

Reduces surface dusting, cracking, and erosion

 

Available in metallic (iron/quartz) and non-metallic (mineral-based)

 

Compatible with manual and power trowel finishing

 

🏗️ Ideal Applications:

Industrial factories & warehouses

 

Heavy-load machine foundations

 

Basement parking & ramps

 

Precast yards and foundries

 

Airport runways & logistics hubs

 

Loading docks, godowns, retail flooring

 

📍 We Supply Across North India (District-wise):

✅ Delhi NCR: New Delhi, Noida, Greater Noida, Gurugram, Faridabad, Ghaziabad, Shahdara, Dwarka, Rohini

✅ UP: Lucknow, Kanpur, Varanasi, Agra, Meerut, Bareilly, Aligarh, Saharanpur

✅ Haryana: Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Yamunanagar, Ambala

✅ Punjab: Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan: Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar: Patna, Gaya, Muzaffarpur, Bhagalpur

✅ Jharkhand: Ranchi, Jamshedpur, Dhanbad

✅ Uttarakhand & HP: Dehradun, Haridwar, Roorkee, Shimla, Solan

✅ J&K (UT): Jammu, Srinagar, Kathua, Udhampur

 

#FloorHardenerDelhi #MetallicFloorHardenerNoida #NonMetallicHardenerGhaziabad

#ShaliFloorMDH #ShaliFloorNM #CICOFloorTopRTU #SikachapdurIN #SmartTopUltraTech

#IndustrialFloorHardener #HeavyDutyFloorCoating #NitoflorHardtopStandard

#WarehouseFloorTreatment #ConcreteSurfaceHardener #DryShakeFloorHardener

#FloorHardenerNorthIndia #AbrasionResistantFloorDelhi #DustproofFlooringSolution

#STPFloorHardener #CICOTopRTU #SikaFloorHardenerIndia #UltraTechSmartTop 

Shalicryl Lm waterproofing coating

Request Callback

₹ 450 / Kg Get Latest Price

Product Brochure
Pack Size20 L
BrandSTP Ltd
ColorWhite
Packaging Size20 L
Packaging TypeDrum
Coverage1.2 sqmtr / KG / Coat
Shelf Life12 months
Usage/ApplicationWaterproofing
Country of OriginMade in India
ShaliCryl® LM is a single component, energy saving, UV resistant, elastomeric, micro fiber reinforced, heavy duty monolithic / seamless waterproofing liquid membrane having high mechanical strength and resistance to fungal growth. It is a three-layer system with coats in 3 different colours ensuring proper build-up of the thickness. The top coat shall be white for a good cooling effect arising out of its high SRI

Shalicem Ewp

Request Callback

₹ 60 / Kg Get Latest Price

Product Brochure
BrandSTP
Packaging Size20 L
Available ColourGrey
ColorGrey
Packaging TypeBucket
Paint Base TypeWater Based
Form Of PaintPowder
ShaliCem® EWP is a two-component, UV resistant, acrylic polymer modified cementitious coating system that is mixed on site to form an elastomeric waterproofing coating. It can be applied on concrete, masonry by brush, roller or trowel. The coating forms a hard finish, seamless surface that act as a barrier to waterborne salts and atmospheric gases.

Field of Application

• Concrete, masonry • Waterproofing treatment of roof, basement raft against rising dampness • Roofs, terraces and damp patches on walls to seal joints through which there is a possibility of water ingress • Underneath tile mortars in kitchens & toilets Advantages • UV Resistant • Breathable, water vapor permeable • Non-toxic solvent free, environment friendly • Flexible, bonds to porous and non-porous surface 

STP Shalikote T10

Request Callback

₹ 65 / Kg Get Latest Price

Product Brochure
Available ColourBlack
BrandSTP Limited
Packaging Size20 kg
ColorShalikote T10
Physical StateLiquid
Usage/ApplicationBituminous Waterproofing
Application surfaceWood
Packaging TypeDrum
Country of OriginMade in India
Manufactured BySTP Ltd
Shelf Life6 Months
Ph Value3 to 7
Solubility100% Soluble In Water
Volatility40 to 50%
Drying TimeTouch Dry 8 Hours,Hard Dry 24 Hours
Coverage0.4 Kg/M2 On Metal Surface,0.5 Kg/M2 On Concrete Surface

Contact no   It is water based bituminous emulsion with finely divided bitumen dispersed in water and is ready for application on wet surfaces.
Shalikote T10 ,STPShalikote t10, Shalimar Shalikote t10,, Black STP Shalikote t10 bitumen water based primer..

We are Dealing in Noida, Kanpur, lucknow, Ghaziabad, Delhi, jaipur, Chandigarh, Ambala, Punjab, Himachal,  Jammu and Kashmir. 

ShaliUrethane LHM 2K Polyurethane Waterproofing Membrane

Request Callback

₹ 565 / Kg Get Latest Price

Product Brochure
MaterialRubber
Brandstp ltd
Usage/ApplicationRoof / Terraces / Podium
ColorBlack
Packaging Type26kg
ShaliUrethane LHM 2K is a two component, elastic, cold applied polyurethane liquid membrane system for water proofing and protection.
It conforms to ASTM C836 and C 898.

ShaliUrethane BTD Elastomeric PU Liquid Membrane

Request Callback

₹ 180 / Kg Get Latest Price

Product Brochure
MaterialRubber
Packaging Size20 L
Brandstp ltd
Coverage1.6kg per sq meter
Usage/ApplicationRoof / Terraces, including corrugated roof
ColorWhite / Terracotta / Green
Packaging TypeBucket

Minimum order quantity: 10 Kg

ShaliUrethane BTD is high performance, water based, cold applied, single component elastomeric in-situ liquid membrane for waterproofing usually produced in White / Terracotta / Green color. It may also be supplied in Black color against specific orders.

ShaliEPDM

Request Callback

₹ 500 / Roll Get Latest Price

Product Brochure
MaterialBitumen
Thickness1.2mm
Usage/ApplicationWaterproofing Membrane
TypeWaterproofing
ColorBlack
PatternPlain
BrandSTP Ltd

Minimum order quantity: 10 Roll

STP Non Reinforced ShaliEPDM is a synthetic single ply preformed Waterproofing Membrane in black colour. The sheet maybe non-reinforced or fabric / scrim reinforced. It is available in roll form with following dimensions. ShaliEPDM membrane is ideal for Waterproofing of Basement, Terrace and Pond Lining. It offers outstanding ozone and weather resistance delivering one of the longest service lives available. It Confirms ASTM D 4637 Type I.

ShaliFloor NM Non Metallic Floor Hardener

Request Callback

₹ 400 / Bag Get Latest Price

Product Brochure
Packaging Size25 kg
Country of OriginMade in India

Minimum order quantity: 25 Bag

ShaliFloor® NM is one part, pre-blended, mixture of finely graded non-metallic aggregates, additives, cement and pigments.

ShaliFloor® NM is a concrete floor hardener recommended for both interior and exterior use, and has non-rusting characteristic.

ShaliFloor® NM is added to floor surface to improve its abrasion resistance and inhibit dust formation.

We supply high-performance floor hardeners — both metallic and non-metallic — ideal for increasing surface durability, abrasion resistance, and impact strength of concrete floors.

 

Our floor hardeners are trusted in industrial, warehouse, commercial, and heavy-traffic flooring applications, and conform to IS 1237 & ASTM C779 standards.

 

Metallic & Non-Metallic Floor Hardeners – Industrial Grade

🏷️ Top Brands We Offer:

STP Ltd – ShaliFloor® M DH (Metallic), ShaliFloor® NM (Non-Metallic)

 

CICO Technologies – Surface Hardener, CICOFLOOR TOP RTU (M/NM)

 

Fosroc Chemicals – Nitoflor Hardtop Standard

 

Sika India – Sikachapdur IN

 

UltraTech Cement Ltd – SmartTop (Metallic/Non-Metallic)

 

Key Features:

Pre-mixed, factory-ready dry shake

 

Increases compressive strength and abrasion resistance

 

Reduces surface dusting, cracking, and erosion

 

Available in metallic (iron/quartz) and non-metallic (mineral-based)

 

Compatible with manual and power trowel finishing

 

🏗️ Ideal Applications:

Industrial factories & warehouses

 

Heavy-load machine foundations

 

Basement parking & ramps

 

Precast yards and foundries

 

Airport runways & logistics hubs

 

Loading docks, godowns, retail flooring

 

📍 We Supply Across North India (District-wise):

✅ Delhi NCR: New Delhi, Noida, Greater Noida, Gurugram, Faridabad, Ghaziabad, Shahdara, Dwarka, Rohini

✅ UP: Lucknow, Kanpur, Varanasi, Agra, Meerut, Bareilly, Aligarh, Saharanpur

✅ Haryana: Panipat, Karnal, Sonipat, Bahadurgarh, Hisar, Yamunanagar, Ambala

✅ Punjab: Ludhiana, Jalandhar, Patiala, Amritsar, Bathinda, Mohali

✅ Rajasthan: Jaipur, Kota, Jodhpur, Ajmer, Udaipur, Alwar

✅ Bihar: Patna, Gaya, Muzaffarpur, Bhagalpur

✅ Jharkhand: Ranchi, Jamshedpur, Dhanbad

✅ Uttarakhand & HP: Dehradun, Haridwar, Roorkee, Shimla, Solan

✅ J&K (UT): Jammu, Srinagar, Kathua, Udhampur

 

#FloorHardenerDelhi #MetallicFloorHardenerNoida #NonMetallicHardenerGhaziabad

#ShaliFloorMDH #ShaliFloorNM #CICOFloorTopRTU #SikachapdurIN #SmartTopUltraTech

#IndustrialFloorHardener #HeavyDutyFloorCoating #NitoflorHardtopStandard

#WarehouseFloorTreatment #ConcreteSurfaceHardener #DryShakeFloorHardener

#FloorHardenerNorthIndia #AbrasionResistantFloorDelhi #DustproofFlooringSolution

#STPFloorHardener #CICOTopRTU #SikaFloorHardenerIndia #UltraTechSmartTop 

Stp ShaliCry 215

Request Callback

Get Latest Price

Product Brochure
Packaging Size20 L
BrandSTP
Packaging TypeBucket
ColorWhite
Country of OriginMade in India
ShaliCryl® 215 is single component, UV resistant, unique elastomeric, anti-carbonation, high build exterior waterproofing coating based on a revolutionary acrylic polymer with quick-set capabilities to resist moisture attack. Besides inherent waterproofing properties, it possesses durable, flexible, water-resistant and water-repellant properties

STP Shaliurethane LHM Waterproof coating

Request Callback

₹ 240 / Kg Get Latest Price

Product Brochure
Available ColourWhite
Packaging Size25kg
Typepaint
Chemical Usedwaterproofing
Brandstp ltd
Packaging Typedrum
Country of OriginMade in India
Coverage1.58 - 1.60 per Sqm
Colorblack and white

Minimum order quantity: 250 Kg

ShaliUrethane® LHM is single component, high tensile, high solid, moisture cured, modified Polyurethane elastomeric liquid membrane for waterproofing with an elongation of 700 % ± 50. ShaliUrethane® LHM forms a seamless monolithic membrane by reaction with atmospheric moisture.

ShaliCrete Acrylic Polymer Coating

Request Callback

₹ 100 / Litre Get Latest Price

Product Brochure
Packaging Size20 L
System Layer Thickness1mm To 1.5mm
Country of OriginMade in India
ShaliCrete® is a multifunctional acrylic polymer for enhancing properties of concrete, mortar, grout, cement slurry etc. through better bonding, waterproofing and improvement in several other properties. ShaliCrete® is used for permanently bonding plaster to ensure durable finish of exterior walls, bonding new concrete to old concrete, making mortar for repairing and for waterproofing. ShaliCrete® is highly durable in wet condition as well. 

STP ShaliSBR Latex

Request Callback

Get Latest Price

Product Brochure
BrandSTP
Packaging Size20ltr / 200ltr
Usage/ApplicationWaterproofing And Repair Mortar
Packaging TypeDrum
Physical FormLiquid
pH Value7 - 9
Shelf Life12 Months
ShaliSBR Latex is an emulsion of single component styrene butadiene co-polymer based latex specially developed to improve the properties of cementations compositions. It is fully soluble in water and is to be added directly to the gauging water of slurry / mortar / concrete / grout. Mortars produced with ShaliSBR Latex may be used for horizontal, vertical and overhead repair work. It is used with cement to produce a waterproofing membrane for concrete structures.

Shalifloor WB ES 2PU

Request Callback

₹ 250 / Kg Get Latest Price

Product Brochure
Packaging Size20 liter
Packaging TypeBucket
BrandSTP
Material CompatibilityCeramic
Chemical ResistanceWater
ShaliFloor® WB ES 2PU is medium hard two component water based Polyurethane coating which exhibits excellent toughness along with scratch hardness and anti-skidding properties. It can be used as a top coat for Polyurethane / Epoxy flooring.

Application Applied on Polyurethane and Epoxy floorings. Advantages • Excellent adhesion and flexibility. • Resists scratch / abrasion / black heal mark. • Resistant to UV / weather. • Resists chemical / normal cleaning agents used in house-keeping. Application Methodology ➢ Surface Preparation • Prepare the surface by mechanical grinding or other suitable method. • Remove dust, flakes, oil, grease or other loose foreign particles by sand blasting, iron brush or compressed air. Remove old painting using surface grinder. • Remove old painting using surface grinder. • For best bond, concrete surface must be slightly textured. • Allow it to dry before priming. ➢ Material Preparation • Mix ShaliFloor® WB ES 2PU component A (Resin) & B (Hardener) thoroughly by using speed drill mixer with a spiral type blade at the bottom of stirrer rod. The speed may be 1000 rpm till homogeneous mix is obtained. • After stirring, wait for the product to settle in order to let entrapped air escape. ➢ Application of Material • Prime concrete surface with ShaliPrime® 2E and in case of metal surface, prime with ShaliPrime® Zn R. • Apply mixed ShaliFloor® WB ES 2PU on primed surface immediately by brush / trowe

STP ShaliHDPE SA

STP ShaliDrain 8F

STP ShaliCem FWP

STP ShaliTPO HG

STP ShaliUrethane WPU

STP ShaliUrethane LHM 2K

STP ShaliProtek PuR 40

STP Shalicryst 200

STP ShaliPlast IW

STP Shalicem Ewp Ar

STP ShaliCem EWP 200

STP ShaliCem EWP 150

STP AquaShield

STP ShaliCool Guard

STP ShaliDrainCell 30

STP ShaliProtek PU HA

STP ShaliTape Flex

STP ShaliKote SWP

STP ShaliCryl TC 100 E

X

Contact Us

Ram Gupta (CEO)
Shiv Sons
Shop No. 7, Shyam Vihar Market Opposite LIC Building & Indian Petrol Pump, Near Rakesh Marg, G. T. Road
Ghaziabad - 201001, Uttar Pradesh, India

Get Directions
Send Email
Share: