- Home
- »
- Our Products
- »
- Xchem polymers waterproofing Chemicals
Xchem polymers waterproofing Chemicals
ENIROOF EMB, ENIROOFEMBPU, ENIROOF SPU, ENIROOF BLACK ,ENIROOF SPR,
XCHEM ENIROOF BLACK
Product Brochure
Brand | Star Coatings & Membranes Pvt. Ltd. |
Packaging Size | 20 kg |
Packaging Type | Bucket |
Specific Gravity | 0.97 kg/ltr |
Tensile Strength | 2 N/mm2 |
Bonding Strength | 1.8 N/mm2 |
Appearance | Brownish Paste |
Elongation | 500% |
Softening Point | 120 deg C |
- It is a scientific blend of pitch free bitumen, synthetic resins, selected minerals and fillers.
- It is a protective and waterproof coating.
- It is a high performance coating that dries to elastic, impermeable waterproof membrane.
- Advantages:
- Easy and direct (cold applied) application, no preheating required.
- Seamless, no joint.
- Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water.
- Corrosion resistant and vapor barrier.
- The application surface must be clean and free from dust grease and loose particles.
- Surface may be damp but not saturated.
- Apply one coat of Eniroof Black Primer, diluting 1kg Eniroof Black with 1lt water, on well-prepared surface.
- Eniroof Black should be stirred well before use.
- It is recommended that 1 - 2 coats should be applied depending upon the degree of protection required after the primer coat.
- Brush, roller or sprayer can apply Eniroof Black.
Xchem Alfix Eniroof EMB
Product Brochure
Packaging Size | 20 L |
Brand | Xchem Alfix |
Available Colour | White |
Packaging Type | Bucket |
Color | White |
Form Of Paint | Liquid |
Easy and direct (cold applied) application, no pre heating required. Seamless, no joint. Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water. Corrosion resistant and vapor barrier.
Useful as protective coating on concrete and brick foundations, retaining walls, timber, metals, etc. Provides a sandwich membrane in new construction and surface treatment on existing slabs. Damp – proofing of regular surfaces like concrete and asbestos. Provides a key for plaster on difficult surfaces. For waterproofing and protection of structure, Concrete, columns and beam
Xchem Alfix Eniroof Black
Product Brochure
Packaging Size | 20 L |
Brand | Xchem Alfix |
Available Colour | White |
Packaging Type | Bucket |
Color | White |
Xchem Alfix Eniroof EMB PU
Product Brochure
Packaging Size | 20 L |
Brand | Xchem Alfix |
Available Colour | White |
Packaging Type | Bucket |
Color | White |
Usage | Roofs , Surface |
Paint Base Type | Water Based |
Xchem Alfix Coatings is based in India, Delhi, established in 2003. They are manufacturer and provider of Adhesives, Concrete Repairs Solutions, Admixture and Plasticizers. They are focusing on market research and R and D due to that their products are eco-friendly and durable followed the industry standard.
This Star coating waterproofing provides an impervious waterproofing membrane that protects the concrete structure and brick foundations against chloride and sulphate ions present in soils and water. Key Features:
- Solid Polyurethane Modified Waterproof Coating.
- Corrosion-resistant and vapour barrier.
- It is a high-performance coating that dries to an elastic, flexible, impermeable waterproof membrane.
- Easy and direct (cold applied) application, no preheating required.
- It is recommended to apply ENIROOF EMB PU in 2coats, at the spread rate of 250.00 ml/Sqmt/coat.
- This is advisable to dilute ENIROOF EMB PU with water or any other suitable solvent to make coating brushable,
maximum dilution will be 300 ml/kg of ENIROOF EMB PU.(Coverage depends on the porosity of the surface and method of application
Xchem Alfix Eniroof SPU
Product Brochure
Packaging Size | 20 L |
Brand | Xchem Alfix |
Available Colour | White |
Packaging Type | Bucket |
Color | White |
Usage | Waterproofing Coating |
Xchem Alfix Eniroof SPR
Product Brochure
Packaging Size | 20 L |
Brand | Xchem Alfix |
Available Colour | White |
Packaging Type | Bucket |
Color | White |
Form Of Paint | Liquid |
Xchem Eniroof SPR
Product Brochure
Brand | Star Coatings & Membranes Pvt Ltd |
Packaging Size | 20kg |
Usage/Application | Plastic, Concrete, Metal, Roofs |
Form | Liquid |
Packaging Type | Plastic Pail |
Tensile Strength | 4 N/m2 |
Shelf Life | 18 months |
Manufactured By | Star |
Solid Content | 65% |
Bond Strength | 60 psi |
- It is a special synthetic resin based waterproof coating.
- Due to its excellent flexibility and thixotropic nature, it is an ideal product for vertical and horizontal surfaces.
- It is a single pack, very economical and pollution free waterproof coating.
- Because of its white colour it has excellent solar insulation capacity.
Advantages:
- Life and durability of the structure is increased.
- Easy application.
- No mixing or heating required.
- Lightweight compared to conventional roofing systems, thereby loading on the roofs is reduced.
- Provides seamless and joint free seal through out the surface.
- Lower labour cost due to easy, simple and quick application, leading to early completion and time saving.
- Provides insulation due to solar reflection.
- Excellent bonding to most building material.
Xchem Aqua Guard 50% - Waterproof Coating
Product Brochure
Brand | Star Coatings & Membranes Pvt. Ltd. |
Usage/Application | roof. sheet |
Packaging Size | 20ltr |
Type | Acrylic |
Color | white |
Packaging Type | Bucket |
Raw Material | Acrylic polymer |
Xchem Eniroof EMB
Product Brochure
Usage/Application | Roofs,Concrete |
Packaging Size | 20 kg,200 kg |
Color | Brownish Black |
Brand | Star Coatings & Membranes Pvt. Ltd. |
Specific Gravity | 1 to 1.8 |
Shelf Life | 18 months |
Thickness | 1mm |
Packaging Type | Plastic Pail,Drum |
Manufactured By | Star |
Bond Strength | 3.3 Kg/cm2 |
Solid Content | 53.5% by weight |
Softening Point | Max 120 deg C |
- It is a scientific blend of synthetic resins, selected minerals and fillers modified with polyurethane.
- It is a protective and waterproof coating.
- It is a high performance coating that dries to elastic, flexible, impermeable waterproof membrane.
- Easy and direct (cold applied) application, no preheating required.
- Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water.
- Corrosion resistant and vapor barrier.
Advantages:
- Easy and direct (cold applied) application, no pre heating required.
- Seamless, no joint.
- Provides an impervious waterproofing membrane that protects concrete structure and brick foundations against chloride and sulphate ions present in soils and water.
- Corrosion resistant and vapor barrier.
Recommended Uses:
- Useful as protective coating on concrete nd brick foundations, retaining walls, timber, metals, etc.
- Provides a sandwich membrane in new construction and surface treatment on existing slabs.
- Damp-proofing of regular surfaces like concrete and asbestos.
- Provides a key for plaster on difficult surfaces.
- For waterproofing and protection of structure, concrete, columns and beam.
Xchem ENIROOF SPU
Available Colour | White |
Packaging Size | 20 L |
Packaging Type | Drum |
Color | White |
Usage | WATERPROOF COATING |
Xchem Alfix Aquaguard 1C
Product Brochure
Packaging Size | 5 Litre |
Packaging Type | Bucket |
Model | Aquaguard 1C |
Application | Flooring, Laminating |
Grade Standard | Chemical |
Strength | High |
Xchem Alfiix Eniroof Clear
Product Brochure
Packaging Size | 20 L |
Brand | Xchem Alfiix |
Available Colour | Grey |
Packaging Type | Drum |
Color | Grey |
Form Of Paint | Liquid |
Xchem Alfix Aquaguard 2C 50
Product Brochure
Capacity | 15 Litre |
Storage Capacity | 4 L |
Installation Type | Wall Mount / Table Top |
Model Name/Number | Aquaguard 2C 50 |
ADVANTAGES
AQUAGUARD 50% is a ACRYLIC based polymer used for making of cement based waterproofing slurry that is flexible and can be used as coating for control of efflorescence. AQUAGUARD 50% having excellent UV resistance and stability, surface coated with AQUAGUARD 50% can be left exposed to sunlight. AQUAGUARD 50% can be used as bonding agent also. AQUAGUARD 50% is having more than 50 % active ingredients and therefore it is the best cement based waterproof slurry for coating on concrete and all building surfaces required for waterproofing.
RECOMMENDED USES
- Water proofing of basements, toilet, terraces, roofs, swimming pools, water tanks, bridge decks, etc.
- Suitable for general concrete repairs as concrete admixture. It gives excellent bond strength.
- It can be used for protection of concrete against corrosion, salt attack, etc.
- As Bonding Agent for plaster, concreting (Old to New), stucco and cement slurry bond coat.
COVERAGE
1 Lt. AQUAGUARD 50%® mixed as per data sheet will cover appx. 4.5 sqmt – 5.0-sqmt areas in 2 coats depending upon the porosity of the surface.
SURFACE PREPARATION
The application surface must be clean and free from dust grease and loose particles. Surface may be damp but not saturated. Prime the prepared surface using AQUAGUARD 50% PRIMER (1 part AQUAGUARD 50%® and 3 parts water) with brush, roller or spray.
Xchem Alfix Aquaguard 2C 40
Product Brochure
Storage Capacity | 5 L |
Capacity | 25 Litre |
Installation Type | Wall Mounted |