Call 08048965804 82% Response Rate

Send Email

Pypkote Wrapping Coating

Offering you a complete choice of products which include pypkote anti corrosion pipe wrapping & coating tape, pypkote wrapping coating, iwl pypkote 4mm wrapping coating tape, pypkote pipeline corrosion resistant tape, pypkote wrapping coating 4mm and pypkote.
Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape
  • Pypkote Anti Corrosion Pipe Wrapping & Coating Tape

Pypkote Anti Corrosion Pipe Wrapping & Coating Tape

Product Price: Rs 2,250 / RollGet Best Price

Product Brochure

Product Details:
TypeSingle Sided
BrandIWL India Limited
Usage/ApplicationBinding
MaterialPolyester
ColorBlack
Elongation200%
Softening Point65 to 121 deg C
Manufactured ByIWL india ltd
Packaging TypeRoll
Width150mm,250mm,500mm,1000mm
Filler20 to 30%

Contact no   Pypkote is a pipeline corrosion resistant tape conforming to IS:10221 appendix B specification.It comprises of a tar based polymeric mix supported on a fabric of high tensile strength fibreglass.The polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing.
Tape is terminated on both exteriors by thermofusible HMHDPE Film which aids in the installation process.
Application is fast and easy.
The pipe surface is first cleaned with a wire brush.
IWL CS is applied on pipes immediately after cleaning.
This is to prevent any further accumulation of rust on the pipe.
After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry.
Before adhering the tape to the pipe, it is advisable to gently heat the primercoated pipe by a run of LPG torch.
The bottom surface of the tape is heated by LPG Torch or any heat source.
The tape is wrapped either by spiral or circumference method over the pipe.
By heating the primercoated pipe and by removing the bottom polyethylene from the tape before wrapping, better adhesion between the tape and pipe is obtained.
Overlaps are maintained with a minimum of 12 mm.
A final coat of white wash is done immediately over the entire coated pipe.
Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed.
The procedure for application of tape is the same as bare pipe procedure.
Overlapson each side of the weld joints are to be 50 mm.

#Pypkote installation
#wrapping tape 4mmprice
#pypkote 4mm  wrapping tape
#pypkote 4mm suppliers
#pypkote manufacturers in India
#pypkote board suppliers in delhi
#pypkote pipekote wrapping tape manufacturers
#Pypkote 4mm India
#Pypkote 4mm  price
#Pypkote 4mm manufacturers
# Pypkote 4mm wrapping tape
#4mm # Pypkote 2mm price
#Pypkote 4mm suppliers in Delhi,Noida,gurgaon
Pypkote 4mm india
# Pypkote 4mm manufacturers in india
# Pypkote 4mm IN INDIA



Additional Information:

  • Item Code: 6807
Get Best QuoteRequest A Callback
Pypkote Wrapping Coating
  • Pypkote Wrapping Coating
  • Pypkote Wrapping Coating
  • Pypkote Wrapping Coating
  • Pypkote Wrapping Coating
  • Pypkote Wrapping Coating

Pypkote Wrapping Coating

Product Price: Rs 2,100 / RollGet Best Price

Product Brochure

Product Details:
Tape Width>100 mm
BrandIWL India Limited
Usage/ApplicationBinding
Size2 inch
Quantity Per PackROLL
Tape LengthMETER
Water ProofYES
Temperature Range65 TO 121

Contact no   Pypkote 2 mm is a Pipeline Corrosion Resistant Tape conforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a film of high tensile strength HMHDPE. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermofusible HMHDPE Films which aids in the installation process. Pypkote 2 mm is available in widths of 500mm and 1000mm. Application is fast and easy. The pipe surface is first cleaned with a wire brush. IWL CS is applied on pipes immediately after cleaning. This is to prevent any further accumulation of rust on the pipe. After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry. Before adhering the tape to the pipe, it is advisable to gently heat the CS coated pipe by a run of LPG torch. The bottom surface of the tape is heated by LPG Torch or any heat source. The tape is wrapped either by spiral or circumference method over the pipe. Overlaps are maintained with a minimum of 12 mm. A final coat of White Wash is done immediately over the entire coated pipe. Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed. The procedure for application of tape is the same as bare pipe procedure. Overlaps on each side of the weld joints are to be 50 mm. Pypkote 2 mm may also be applied as double layer system. In this case a second coat of IWL CS is applied over the first layer of Pypkote 2 mm tape. The CS is allowed to become touch dry. The bottom layer of HMHDPE film is removed from the tape by pulling it manually. The tape is thermofused and wrapped over the primed surface of the first layer like the first application. The overlaps are maintained at a minimum of 12 mm and sealed by thermofusion. Weld Joints are also similarly double wrapped. Pypkote tape is recommended for application closer to the time of pipe erection and lowering inside trenches to avoid damages to Pypkote. While in storage, Pypkote Rolls must be stacked properly under cover.

#Pypkote installation
#wrapping tape 4mmprice
#pypkote 4mm  wrapping tape
#pypkote 4mm suppliers
#pypkote manufacturers in India
#pypkote board suppliers in delhi
#pypkote pipekote wrapping tape manufacturers
#Pypkote 4mm India
#Pypkote 4mm  price
#Pypkote 4mm manufacturers
# Pypkote 4mm wrapping tape
#4mm # Pypkote 2mm price
#Pypkote 4mm suppliers in Delhi,Noida,gurgaon
Pypkote 4mm india
# Pypkote 4mm manufacturers in india
# Pypkote 4mm IN INDIA



Additional Information:

  • Item Code: 68079010
  • Delivery Time: SAME DAY
  • Packaging Details: ROLL
Get Best QuoteRequest A Callback
IWL Pypkote 4mm Wrapping Coating Tape
  • IWL Pypkote 4mm Wrapping Coating Tape
  • IWL Pypkote 4mm Wrapping Coating Tape
  • IWL Pypkote 4mm Wrapping Coating Tape
  • IWL Pypkote 4mm Wrapping Coating Tape
  • IWL Pypkote 4mm Wrapping Coating Tape

IWL Pypkote 4mm Wrapping Coating Tape

Product Price: Rs 2,250 / RollGet Best Price

Product Brochure

Product Details:
Tape Length10 m
Tape Thickness4 mm
ColorBlack
BrandIWL
Tape TypeNon Adhesive
Total Thickness4mm
Adhesive TypeBitumen
Adhesive StrengthHigh
Country of OriginMade in India

Contact no   Pypkote 2 mm is a Pipeline Corrosion Resistant Tape conforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a film of high tensile strength HMHDPE. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermofusible HMHDPE Films which aids in the installation process. Pypkote 2 mm is available in widths of 500mm and 1000mm. Application is fast and easy. The pipe surface is first cleaned with a wire brush. IWL CS is applied on pipes immediately after cleaning. This is to prevent any further accumulation of rust on the pipe. After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry. Before adhering the tape to the pipe, it is advisable to gently heat the CS coated pipe by a run of LPG torch. The bottom surface of the tape is heated by LPG Torch or any heat source. The tape is wrapped either by spiral or circumference method over the pipe. Overlaps are maintained with a minimum of 12 mm. A final coat of White Wash is done immediately over the entire coated pipe. Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed. The procedure for application of tape is the same as bare pipe procedure. Overlaps on each side of the weld joints are to be 50 mm. Pypkote 2 mm may also be applied as double layer system. In this case a second coat of IWL CS is applied over the first layer of Pypkote 2 mm tape. The CS is allowed to become touch dry. The bottom layer of HMHDPE film is removed from the tape by pulling it manually. The tape is thermofused and wrapped over the primed surface of the first layer like the first application. The overlaps are maintained at a minimum of 12 mm and sealed by thermofusion. Weld Joints are also similarly double wrapped. Pypkote tape is recommended for application closer to the time of pipe erection and lowering inside trenches to avoid damages to Pypkote. While in storage, Pypkote Rolls must be stacked properly under cover.

#Pypkote installation
#wrapping tape 4mmprice
#pypkote 4mm  wrapping tape
#pypkote 4mm suppliers
#pypkote manufacturers in India
#pypkote board suppliers in delhi
#pypkote pipekote wrapping tape manufacturers
#Pypkote 4mm India
#Pypkote 4mm  price
#Pypkote 4mm manufacturers
# Pypkote 4mm wrapping tape
#4mm # Pypkote 2mm price
#Pypkote 4mm suppliers in Delhi,Noida,gurgaon
Pypkote 4mm india
# Pypkote 4mm manufacturers in india
# Pypkote 4mm IN INDIA

Get Best QuoteRequest A Callback
Pypkote Pipeline Corrosion Resistant Tape
  • Pypkote Pipeline Corrosion Resistant Tape
  • Pypkote Pipeline Corrosion Resistant Tape
  • Pypkote Pipeline Corrosion Resistant Tape
  • Pypkote Pipeline Corrosion Resistant Tape
  • Pypkote Pipeline Corrosion Resistant Tape

Pypkote Pipeline Corrosion Resistant Tape

Product Price: Rs 230 / Square MeterGet Best Price

Product Brochure

Product Details:
Tape Width4 Inch
ColorBlack
BrandIWL
Tape TypeNon Adhesive
Softening Point65 to 121 DegreeC

Contact no   Pypkote 2 mm is a Pipeline Corrosion Resistant Tape conforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a film of high tensile strength HMHDPE. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermofusible HMHDPE Films which aids in the installation process. Pypkote 2 mm is available in widths of 500mm and 1000mm. Application is fast and easy. The pipe surface is first cleaned with a wire brush. IWL CS is applied on pipes immediately after cleaning. This is to prevent any further accumulation of rust on the pipe. After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry. Before adhering the tape to the pipe, it is advisable to gently heat the CS coated pipe by a run of LPG torch. The bottom surface of the tape is heated by LPG Torch or any heat source. The tape is wrapped either by spiral or circumference method over the pipe. Overlaps are maintained with a minimum of 12 mm. A final coat of White Wash is done immediately over the entire coated pipe. Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed. The procedure for application of tape is the same as bare pipe procedure. Overlaps on each side of the weld joints are to be 50 mm. Pypkote 2 mm may also be applied as double layer system. In this case a second coat of IWL CS is applied over the first layer of Pypkote 2 mm tape. The CS is allowed to become touch dry. The bottom layer of HMHDPE film is removed from the tape by pulling it manually. The tape is thermofused and wrapped over the primed surface of the first layer like the first application. The overlaps are maintained at a minimum of 12 mm and sealed by thermofusion. Weld Joints are also similarly double wrapped. Pypkote tape is recommended for application closer to the time of pipe erection and lowering inside trenches to avoid damages to Pypkote. While in storage, Pypkote Rolls must be stacked properly under cover.

#Pypkote installation
#wrapping tape 4mmprice
#pypkote 4mm  wrapping tape
#pypkote 4mm suppliers
#pypkote manufacturers in India
#pypkote board suppliers in delhi
#pypkote pipekote wrapping tape manufacturers
#Pypkote 4mm India
#Pypkote 4mm  price
#Pypkote 4mm manufacturers
# Pypkote 4mm wrapping tape
#4mm # Pypkote 2mm price
#Pypkote 4mm suppliers in Delhi,Noida,gurgaon
Pypkote 4mm india
# Pypkote 4mm manufacturers in india
# Pypkote 4mm IN INDIA

Get Best QuoteRequest A Callback
Pypkote Wrapping Coating 4mm
  • Pypkote Wrapping Coating 4mm
  • Pypkote Wrapping Coating 4mm
  • Pypkote Wrapping Coating 4mm
  • Pypkote Wrapping Coating 4mm

Pypkote Wrapping Coating 4mm

Product Price: Rs 2,250 / PieceGet Best Price

Product Brochure

Product Details:
Tape Length10 m
Tape Thickness4 mm
ColorBlack
BrandIWL
Usage/FeaturePipe Wrapping Tape
Tape TypeNon Adhesive
Adhesive TypeHot Bitumen
Adhesive StrengthHigh
Pypkote 4 mm is a Pipeline Corrosion Resistant Tape conforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a fabric of high tensile strength Fibreglass. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermofusible HMHDPE Film which aids in the installation process. 

Application is fast and easy. The pipe surface is first cleaned with a wire brush. IWL CS is applied on pipes immediately after cleaning. This is to prevent any further accumulation of rust on the pipe. After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry. Before adhering the tape to the pipe, it is advisable to gently heat the primer coated pipe by a run of LPG torch. The bottom surface of the tape is heated by LPG Torch or any heat source. The tape is wrapped either by spiral or circumference method over the pipe. By heating the primer coated pipe and by removing the bottom polyethylene from the tape before wrapping, better adhesion between the tape and pipe is obtained. Overlaps are maintained with a minimum of 12 mm. Afinal coat of White Wash is done immediately over the entire coated pipe. 
Get Best QuoteRequest A Callback
Pypkote
  • Pypkote
  • Pypkote
  • Pypkote

Pypkote

Product Price: Rs 2,250 / PieceGet Best Price

Product Details:
Tape Length10 m
Tape Width2 Inch
Tape Thickness4 mm
BrandIWL India Limited
MOQRoll
Usage/FeatureBinding
Country of OriginMade in India

Contact no   Pypkote 2 mm is a Pipeline Corrosion Resistant Tape conforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a film of high tensile strength HMHDPE. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermofusible HMHDPE Films which aids in the installation process. Pypkote 2 mm is available in widths of 500mm and 1000mm. Application is fast and easy. The pipe surface is first cleaned with a wire brush. IWL CS is applied on pipes immediately after cleaning. This is to prevent any further accumulation of rust on the pipe. After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry. Before adhering the tape to the pipe, it is advisable to gently heat the CS coated pipe by a run of LPG torch. The bottom surface of the tape is heated by LPG Torch or any heat source. The tape is wrapped either by spiral or circumference method over the pipe. Overlaps are maintained with a minimum of 12 mm. A final coat of White Wash is done immediately over the entire coated pipe. Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed. The procedure for application of tape is the same as bare pipe procedure. Overlaps on each side of the weld joints are to be 50 mm. Pypkote 2 mm may also be applied as double layer system. In this case a second coat of IWL CS is applied over the first layer of Pypkote 2 mm tape. The CS is allowed to become touch dry. The bottom layer of HMHDPE film is removed from the tape by pulling it manually. The tape is thermofused and wrapped over the primed surface of the first layer like the first application. The overlaps are maintained at a minimum of 12 mm and sealed by thermofusion. Weld Joints are also similarly double wrapped. Pypkote tape is recommended for application closer to the time of pipe erection and lowering inside trenches to avoid damages to Pypkote. While in storage, Pypkote Rolls must be stacked properly under cover.
#Pypkote installation
#wrapping tape 4mmprice
#pypkote 4mm  wrapping tape
#pypkote 4mm suppliers
#pypkote manufacturers in India
#pypkote board suppliers in delhi
#pypkote pipekote wrapping tape manufacturers
#Pypkote 4mm India
#Pypkote 4mm  price
#Pypkote 4mm manufacturers
# Pypkote 4mm wrapping tape
#4mm # Pypkote 2mm price
#Pypkote 4mm suppliers in Delhi,Noida,gurgaon
Pypkote 4mm india
# Pypkote 4mm manufacturers in india
# Pypkote 4mm IN INDIA

Get Best QuoteRequest A Callback
Bitumen Emulsion RS 1
  • Bitumen Emulsion RS 1
  • Bitumen Emulsion RS 1

Bitumen Emulsion RS 1

Product Price: Rs 30 / KgGet Best Price

Product Brochure

Product Details:
Penetration Grade40/50
Usage/ApplicationRoad Construction
Type Of BitumenBitumen Emulsion
Physical Statesolid
Packaging TypeDrum
BrandIWL
What isBitumen Emulsion?
Bitumen emulsionis a mixture of fine droplets ofbitumenand water. But as thebitumenis a petroleum product it doesn't mix with water and as it is sticky in nature, it doesn't easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used
Rapid Setting Emulsion (RS)* Medium Setting Emulsion (MS)*Slow Setting Emulsion (SS)
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Shiv Sons. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.