Call 08048965804 74% Response Rate

Send Email

Anti Corrosion Products

Pipe Wrapping Tape,Bitumen Paint,Bitumen Silver Piaint,Anti Corrosive Tape
iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape
  • iWL Pypkote 4mm Wrapping Coating Tape

iWL Pypkote 4mm Wrapping Coating Tape

Product Price: Rs 265 / Square MeterGet Best Price

Product Brochure

Product Details:
Tape Width>100 mm
Tape Length10-20 m
TypeSingle Sided
BrandIWL India Limited
Usage/ApplicationBinding
MaterialPolyester
ColorBlack
Elongation200%
Manufactured ByIWL india ltd
Packaging TypeRoll
Width150mm,250mm,500mm,1000mm
Filler20 to 30%
Softening Point65 to 121 deg C

Pypkote is a pipeline corrosion resistant tape conforming to IS:10221 appendix B specification.It comprises of a tar based polymeric mix supported on a fabric of high tensile strength fibreglass.The polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing.
Tape is terminated on both exteriors by thermofusible HMHDPE Film which aids in the installation process.
Application is fast and easy.
The pipe surface is first cleaned with a wire brush.
IWL CS is applied on pipes immediately after cleaning.
This is to prevent any further accumulation of rust on the pipe.
After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry.
Before adhering the tape to the pipe, it is advisable to gently heat the primercoated pipe by a run of LPG torch.
The bottom surface of the tape is heated by LPG Torch or any heat source.
The tape is wrapped either by spiral or circumference method over the pipe.
By heating the primercoated pipe and by removing the bottom polyethylene from the tape before wrapping, better adhesion between the tape and pipe is obtained.
Overlaps are maintained with a minimum of 12 mm.
A final coat of white wash is done immediately over the entire coated pipe.
Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed.
The procedure for application of tape is the same as bare pipe procedure.
Overlapson each side of the weld joints are to be 50 mm.



Additional Information:

  • Item Code: 6807
Get Best QuoteRequest A Callback
IWL Pypkote 2mm Wrapping Coating Tape
  • IWL Pypkote 2mm Wrapping Coating Tape
  • IWL Pypkote 2mm Wrapping Coating Tape
  • IWL Pypkote 2mm Wrapping Coating Tape
  • IWL Pypkote 2mm Wrapping Coating Tape

IWL Pypkote 2mm Wrapping Coating Tape

Product Price: Rs 170 / Square MeterGet Best Price

Product Brochure

Product Details:
Tape Width>100 mm
BrandIWL India Limited
Usage/ApplicationBinding
Size2 inch
Quantity Per PackROLL
Tape LengthMETER
Water ProofYES
Temperature Range65 TO 121

Pypkote 2 mm is a Pipeline Corrosion Resistant Tape conforming to IS 10221 Appendix B specification. It comprises of a Tar based Polymeric mix supported on a film of high tensile strength HMHDPE. The Polymeric mix is specially manufactured to have properties of high softening point, high penetration and high resistance to ageing. Tape is terminated on both exteriors by thermofusible HMHDPE Films which aids in the installation process. Pypkote 2 mm is available in widths of 500mm and 1000mm. Application is fast and easy. The pipe surface is first cleaned with a wire brush. IWL CS is applied on pipes immediately after cleaning. This is to prevent any further accumulation of rust on the pipe. After the primer is applied on the pipe, it is allowed to dry for about 30 minutes till it becomes touch dry. Before adhering the tape to the pipe, it is advisable to gently heat the CS coated pipe by a run of LPG torch. The bottom surface of the tape is heated by LPG Torch or any heat source. The tape is wrapped either by spiral or circumference method over the pipe. Overlaps are maintained with a minimum of 12 mm. A final coat of White Wash is done immediately over the entire coated pipe. Over weld joints, the tape is applied after the necessary welding and testing of the joints are completed. The procedure for application of tape is the same as bare pipe procedure. Overlaps on each side of the weld joints are to be 50 mm. Pypkote 2 mm may also be applied as double layer system. In this case a second coat of IWL CS is applied over the first layer of Pypkote 2 mm tape. The CS is allowed to become touch dry. The bottom layer of HMHDPE film is removed from the tape by pulling it manually. The tape is thermofused and wrapped over the primed surface of the first layer like the first application. The overlaps are maintained at a minimum of 12 mm and sealed by thermofusion. Weld Joints are also similarly double wrapped. Pypkote tape is recommended for application closer to the time of pipe erection and lowering inside trenches to avoid damages to Pypkote. While in storage, Pypkote Rolls must be stacked properly under cover.



Additional Information:

  • Item Code: 68079010
  • Delivery Time: SAME DAY
  • Packaging Details: ROLL
Get Best QuoteRequest A Callback
STP TankMastic anti-corrosive Coatings
  • STP TankMastic anti-corrosive Coatings
  • STP TankMastic anti-corrosive Coatings
  • STP TankMastic anti-corrosive Coatings

STP TankMastic anti-corrosive Coatings

Product Price: Rs 135 / LitreGet Best Price

Minimum Order Quantity: 5 Litre

Product Brochure

Product Details:
BrandSTP Limited
Usage/ApplicationMetal
Packaging Size20kg
Coverage.200
ColorBlack
Service CityGhaziabad
FormLiquid

TankMastic is a specially formulated anti-corrosive, tasteless, odourless, nontoxic and black bituminous coating for protecting the internal surface of storage water tanks, pipes, etc. from corrosion. It conforms to IS: 9862/1981 as well IS: 158/1981.

Tankmastic ,STP Tankmastic, Shalimar Tankmastic, Black stp Tankmastic Anti corrosive.
We are Dealing in Noida, Kanpur, lucknow, Ghaziabad,Delhi, jaipur, Chandigarh, Ambala, Punjab, Himachal,  Jammu and Kashmir.



Additional Information:

  • Item Code: 2715
Get Best QuoteRequest A Callback
STP Shalimastic HD
  • STP Shalimastic HD
  • STP Shalimastic HD
  • STP Shalimastic HD
  • STP Shalimastic HD

STP Shalimastic HD

Product Price: Rs 127 / LitreGet Best Price

Minimum Order Quantity: 500 Litre

Product Brochure

Product Details:
Usage/ApplicationIndustrial Use
Packaging Size20kg
Packaging Typedrum
Colorblack
Shelf Life12
BrandSTP
Country of OriginMade in India
ShaliMastic® HD / LC is an anti-corrosive, heavy duty thermoplastic high / low build coating based on specially processed coal tar pitch. ShaliMastic® HD conforms generally to the American Bureau of Reclamations specification “Cold Applied Coal Tar Compound CA 50. ShaliMastic® LC conforms to IS: 290.
Shalimastic HD ,STP Shalimastic HD, Shalimar Shalimastic HD,, Black STP Shalimastic HD  Anti Corrosive.

We are Dealing in Noida, Kanpur, lucknow, Ghaziabad, Delhi, jaipur, Chandigarh, Ambala, Punjab, Himachal,  Jammu and Kashmir. 
Get Best QuoteRequest A Callback
STP ShaliPoxy CTE 103 - Coal Tar Epoxy

STP ShaliPoxy CTE 103 - Coal Tar Epoxy

Product Price: Rs 170 / LitreGet Best Price

Product Details:
Brandstp ltd
Usage/ApplicationFloors
Grade StandardIndustrial Grade
ColorBlack
Packaging Size20 Ltr
Packaging TypeBucket
FormLiquid
Coveragem2/L 4 SQ METER
  • ShaliPoxy CTE 103 (Formerly known as ShaliPoxy CTE HB / LB) is a two component, coal tar epoxy protective coating for steel and concrete surfaces having excellent corrosion / chemical / abrasion / scratch resistance through 135 - 165 micron coating in single coat
  • It conforms to AWWA C-210 : 2015 SSPC Paint 16 and Corp of Engineers C200 / C200a. 
  • Shalipoxy CTE 103,STP Shalipoxy CTE 103, Shalimar Shalipoxy CTE 103, Black STP Shalipoxy CTE103 Coal Tar Epoxy.

    We are Dealing in Noida, Kanpur, lucknow, Ghaziabad, Delhi, jaipur, Chandigarh, Ambala, Punjab, Himachal,  Jammu and Kashmir. 
Get Best QuoteRequest A Callback
SuperSilverShield

SuperSilverShield

Product Price: Rs 197 / LitreGet Best Price

Product Details:
Usage/ApplicationIndustrial Use
Shapedrum
Size20 kg
Country of OriginMade in India
SuperSilverShield® is an anti-corrosive, water proofing paint with aluminium finish SuperSilverShield® is composed of oxidized bitumen, solvents and specially formulated aluminum compound
Get Best QuoteRequest A Callback
Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant
  • Black STP Tarplastic Waterproofing Sealant

Black STP Tarplastic Waterproofing Sealant

Product Price: Rs 90 / KgGet Best Price

Minimum Order Quantity: 20 Kg

Product Brochure

Product Details:
Form Of ChemicalsLiquid
Bitumen CoalCold Applied Bituminous Compound With Mineral Fillers
Packaging TypeDrum
BrandSTP Limited
Usage/ApplicationConstruction
Country of OriginMade in India
Manufactured BySTP LIMITED
Specific Gravity1.2
Setting Time72 hours

It is a cold applied bituminous caulking compound with mineral fillers in a volatilesolvent to retain its plasticity.
It is available in a putty form. TarPlastic remains plastic for aconsiderable length of time.
Tarplastic ,STP Tarplastic, Shalimar Tarplastic, Black stp Tarplastic compound,
We are Dealing in Noida, Kanpur, lucknow, Delhi, jaipur, Chandigarh, Ambala, Punjab, Himachal,  Jammu and Kashmir.



Additional Information:

  • Delivery Time: same day
  • Packaging Details: 1kg ,4kg,20kg,200kg
Get Best QuoteRequest A Callback
Dr.seal plast caulking compound
  • Dr.seal plast caulking compound
  • Dr.seal plast caulking compound

Dr.seal plast caulking compound

Product Price: Rs 1,500 / DrumGet Best Price

Product Details:
Typecaulking compound
Type Of BitumenAsphalt
Usage/ApplicationBituminous Waterproofing
Packaging TypeBucket
Application IndustryCaulking, Jointing
Surface Of ApplicationPlastic, Metal
Drying Time72 hr(for 3 mm)
Material CompatibilityPlastic, Metal
Materialbitumen
ColorBlack
Packaging Size20KG , 200KG
BrandDR .SEAL PLAST

 PLAST is a cold applied bituminous caulking compound with mineral fillers in a volatile solvent to retain its plasticity. It is available in a putty form. 
 PLAST remains plastic for a considerable length of time. The skin and interior harden to some extent after application.
We are Dealing in Noida,Delhi,Haryana, Chandigarh, Punjab, Jammu and Kashmir.



Additional Information:

  • Delivery Time: same day
  • Packaging Details: drum
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Anti Corrosion Products"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

3.6/5

★★★★★★★★★★

Reviewed by 8 Users

  • 5★4
  • 4★1
  • 3★1
  • 2★0
  • 1★2
  • User Satisfaction
  • Response50%
  • Quality     50%
  • Delivery   66%

Most Relevant Reviews

D
★★★★★★★★★★
10-November-21
Deepak
Ghaziabad, Uttar Pradesh
Nice experience , received good quality of products
Response
Quality
Delivery
C
★★★★★★★★★★
15-January-21
Chirag Gupta
Ghaziabad, Uttar Pradesh
Product Name : APP Membrane
Response
Quality
Delivery
G
★★★★★★★★★★
28-February-22
Gourav Singh
Gandhinagar, Gujarat
Product Name : Floor Hardener

© Shiv Sons. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.